Search results

Search the forum Search Articles
  1. C

    F/S: MPA BA Comp Chassis - SA - 700 & Clones

    For Sale: Masterpiece Arms BA Comp Chassis Short Action - Right Hand For 700 & Clones Includes everything pictured or listed; night vision bridge, pic rail up front, enhanced vertical grip, bag rider, new wedge lock action screws, mag block insert, rotating barricade stop, Ryan Castle mag cut...
  2. C

    F/S: Bushnell DMR-II 3.5-21x50mm w/G2

    For Sale: Bushnell Elite DMR-II 3.5-21x50mm G2 Reticle (non-illuminated) Low profile 10 mil/rev turrets w/ zero stop and locking windage This particular scope is new in box (has been opened but never used), however I competed with one of these exclusively for over two years. I don't personally...
  3. C

    F/S: Swarovski SLC 10x42

    For Sale: Swarovski SLC 10x42 NEU Used, in very good condition. They are great, however they're just not a form factor I'm currently using. There are exceedingly minor marks on the lenses, too insignificant to capture with my photography skills. Includes lens covers and a bag, does not include...
  4. C

    why did ARC suspend Barloc sales?

    That’s in reference to my preferred installation method, specifically using my vise to clamp a barrel while it’s still installed in a chassis or stock. Ross Vise
  5. C

    why did ARC suspend Barloc sales?

    I haven’t tried it with a Proof, and wouldn’t recommend it. Just too much risk on a pricy barrel. If I ever get ahold of a shot out one I’ll do some abuse testing and report back.
  6. C

    Rifle Scopes So many Kahles for sale....whats up?

    I imagine the 55% off certs that Kahles has been putting on prize tables is a factor, especially for the new in box K525’s I see.
  7. C

    why did ARC suspend Barloc sales?

    Having installed barrels hundreds of times while gripping them close to the muzzle, I can assure you that there are no problems doing so. Return to zero is also as close to perfect as I can measure. It’s a non-issue.
  8. C

    Dope card

    I'm not Sheldon, but no matter what I started with (G1, G7, AB custom curve, Hornady custom curve, etc), I'm going to actually test my bullets out of my barrel, preferably with everything else as close to match conditions as possible. Once you have tested data, it's usually pretty...
  9. C

    Rifle Scopes Meopta feedback

    I've got the same bino's, and feel the same way about them.
  10. C

    Which is Trigger you are using Right Now? Share your Choice...

    I've only tried out 8 or so trigger designs in bolt guns. Currently I'm quite happy with TT Diamonds at 12 oz, I switched everything.
  11. C

    Dasher Mags/Mag Kit: ARC? AICS? Accurate?

    x2 or x3 on not having ARC mags work consistently in field conditions. I was finally bit enough times, and painfully enough, that I said never again. I am currently using a AICS/Primal Rights and AW/HRD combo and like it. The AICS is slightly smoother for me, but of course gets in the way...
  12. C

    Dope card

    A day or two before a big match (one that warrants the effort), I'll take a guesstimate at the DA based on what it is currently and the weather forecast. Then I'll make charts , by hand, at the nearest even DA, and one 2,000 ft higher and 2,000 ft lower. So, if I look up (or measure) the DA at...
  13. C

    PRS Talk Illuminated or not...

    I’ve shot 95% of matches without an illuminated reticle and never thought about needing one. I just recently added a scope that has one, and can now see a couple situations where it could be worth turning on. Like Rob pointed out, there’s really no downside to having it, but don’t feel like...
  14. C

    ++Bighorn TL3 Builds++

    If so that’d be great, I’ve found Criterion’s to punch above their weight. That said, I don’t mind gluing on barrel nuts to set my headspace either, have three set up that way now.
  15. C

    For those interested in field swapping barrels...The Ross Vise

    On a 700 (or any action with a separate recoil lug) you would want to keep it aligned. If you pinned it there should be no issues. If you leave it in the stock and the stock is bedded it OUGHT to hold it in place, but I haven’t tried it and therefore can’t recommend it.
  16. C

    For those interested in field swapping barrels...The Ross Vise

    T handle That’s the t-handle I use, I’m happy with it.
  17. C

    ESC Dynamic Gear - Gittings Equalizer Skid Pad

    That’s some fantastic shooting Sheldon! I’ve got one of those pads also, I like it. If I’m using rear support (like a tripod) and there is movement, I prefer using the skidpad up front alone vs a bag. It really makes for smoother transitions.
  18. C

    ++Bighorn TL3 Builds++

    I actually did have an issue with the bolt binding when I first got a TL3. To the point I talked it through with Aaron on the phone. The fix was a combination of break in and a little adjustment of my technique. After a couple thousand dry fires I couldn’t do it wrong. I haven’t personally...
  19. C

    ++Bighorn TL3 Builds++

    It works just like you'd think it would work. My primary caution is to take a little care to avoid getting the Loctite on the action threads or shoulder. I haven't learned this the hard way, but if you were sloppy it'd be possible. Any more I set the headspace (with loctite) by hand, then...
  20. C

    For those interested in field swapping barrels...The Ross Vise

    I would not EVER recommend trying to remove a factory barrel using the stock. They can be on crazy tight, and yes, you are transferring torque through the action screws and bedding. When it comes to pulling and reinstalling a custom barrel, I've done it 100's of times now @ 80 ft-lb (on a...
Top Bottom
Back
Home
Forums
Merch
Alerts