Search results

  1. H

    Primer Pin Whole

    Re: Primer Pin Whole Like I posted, maybe ten times by now, the primers pockets are not loose.... There is no sign of over pressure, other than the cratered primer. Now with the reply from Remington telling that the cratering is "Normal", due to their modification, that only leaves a...
  2. H

    Primer Pin Whole

    Re: Primer Pin Whole Dissociation / Dissociative Behavior is to "Detach", not "Attach"..... You've got it backwards..... People are "Attached" to the published data as a reference, not dissociated from it.... <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By...
  3. H

    Primer Pin Whole

    Re: Primer Pin Whole The reason is people are unaware of the Remington modification that cause cratered primers. Some people cannot see that the cratered primers in some weapons is no loner a sign of dangerous high pressure, but a normal reaction to this modification. Basically, it's your...
  4. H

    Primer Pin Whole

    Re: Primer Pin Whole Direct from Remington: Discussion Thread Response Via Email (Danny) 08/30/2012 01:00 PM The cratering you are seeing is normal on the gun manufactured between 2008 and 2010. We began putting a bevel on the face of the firing pin hole in order to allow the primer cup to...
  5. H

    Primer Pin Whole

    Re: Primer Pin Whole Do a search over the net of people with 700's that have been getting cratered primers. Everyone says the same thing. "It's due to Remington's design".... How about you post a couple screen shot of what you are loading into Quickload, so we can compare.... My Data? I...
  6. H

    switching brass brands question

    Re: switching brass brands question Get ten fired cases from each batch of FGMM and Lapua. Then measure their case capacity in grains of water. Average the measurements of the batches by case brand, FFMM and Lapua. If the case capacity is similar, you should get similar results....
  7. H

    BHTC SNIPER TEAM CHALLENGE 10/6/12, LEWISTOWN PA

    Re: BHTC SNIPER TEAM CHALLENGE 10/6/12, LEWISTOWN PA Sounds like a blast.... Wish I could be there....
  8. H

    Primer Pin Whole

    Re: Primer Pin Whole From the Hodgdon site: Starting load of H4831 for a 162gr projectile is 53gr, and max load is 58gr.... Starting load of H4831 for a 175gr projectile is 52gr and max load is 57gr.... Lighten up Francis.... Edited to add link: http://www.youtube.com/watch?v=C6cxNR9ML8k...
  9. H

    Primer Pin Whole

    Re: Primer Pin Whole What "Data" are you using? You know the saying "Bad in, Bad out"? You must not be as good as you thought.... They're NOT over pressure.... It's a Remington design problem.... Even my 22-250 with factory ammo craters primers.... Get over yourself.... <div...
  10. H

    Range Report chrono doesn't match drop

    Re: chrono doesn't match drop Depending on your velocity verses the velocity of their tested velocity, verses your atmospherics and what atmospherics they were testing in... It's anyone's guess... I find that if you change your BC on the programs slightly, you can compare the result to what...
  11. H

    Range Report chrono doesn't match drop

    Re: chrono doesn't match drop Have you trued you BC? The printed BC is not always what you get. As well as atmospherics will play havoc with what you get from a program like "Shooter", "Exball"... ect... I'm not saying they computers can't be close, but they're not 100% either....
  12. H

    Official MidwayUSA Codes

    Re: Official MidwayUSA Codes Good Until August 31st: $10 off $100 - Promo Code 10812R99 $20 off $200 - Promo Code 20812R99 $30 off $300 - Promo Code 30812R99 Edited to add.... These can only be used once,so whoever gets to it first gets the discount....
  13. H

    Primer Pin Whole

    Re: Primer Pin Whole I loaded rounds with 162gr A-Max's in .5gr increments from 52gr to 54gr. OAL was the same for all grain weights. Here is what I found: (Groups and data from 54.5gr is from the other day when I had the primer failure) Chrono 10 rounds at each grain weight. Chrono was 10...
  14. H

    Need alittle help with my OAL

    Re: Need alittle help with my OAL Every rifle will be a little different with regards to OAL. I have a load that shoots exceptionally for my 270wsm that is jammed into the lands, and then I have a load for my .284 that has .050" jump that bugholes ten rounds at 100yds..... Myself, I would not...
  15. H

    Primer Pin Whole

    Re: Primer Pin Whole Only if Winchester can ship them back home to me... I doubt that is going to happen though... <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Casey Simpson</div><div class="ubbcode-body"> Could you shoot better pics of the cases, and the...
  16. H

    270 WSM Loads

    Re: 270 WSM Loads Case: Winchester Bullet: 135gr SMK Powder and charge: H4831sc @ 68.5 Primer: FGM215M Overall length: 2.931 (.030" jump) Velocity: 3270 (SD of 12) Barrel length: 26" Information about performance of load: Half minute @ 100yds, and < 1MOA at 1000yrds Information about rifle...
  17. H

    ***.284 WIN LOADS***

    Re: ***.284 WIN LOADS*** Case: Winchester .284 Bullet: 175gr SMK Powder and charge: H4831sc @ 54.9 Primer: Winchester WLRM Overall length: 3.218" Velocity: 2730 Barrel length: 26 1/8" Information about performance of load: Load bugholes @ 100yrds, and I have shot half minute ten round group...
  18. H

    Primer Pin Whole

    Re: Primer Pin Whole Better pics of the bolt face.... Damage to the bolt face is most likely due to the jet blast racing around the recess between the primer and case head primer pocket rim, and the blowing out the other side. If you look at the pics of the cases, you will notice a large...
  19. H

    Primer Pin Whole

    Re: Primer Pin Whole The shiny spot on the case head is from the cameras flash. As you look at the pictures one by one, you will see the shiny spot move around the case head. I can assure you that the was no other pressure sign, other than what is seen from the primer it's self. <div...
  20. H

    Primer Pin Whole

    Re: Primer Pin Whole I can so picture this in my head.... You running, middle finger in the air, zig-zagging, as he shouts profanity while rounds are fragging your feet.... LoL.... <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: flounderv2</div><div...