Search results

Search the forum Search Articles
  1. Hogshooter

    Gunsmithing second hand bedded stocks, worth it or not?

    Short answer....yes.
  2. Hogshooter

    5 round 308 Pmag?

    Just ordered 2 of the 5 rd. mags from Midwestpx.com He has them in stock right now.
  3. Hogshooter

    Sidearms & Scatterguns Tic Tic Tic XDS

    A bit of info. You can go to the Springfield site and click on the XDS recall section on the home page. Then click on the "Get Started" link. Enter your serial number and it will come back with the current status of you pistol in the repair process. It will let you know if the repair is complete...
  4. Hogshooter

    Gunsmithing Can I bed this way for a stress free bedding?

    I used some of the contoured pillars for a Remington 700 in a laminated stock. I did a two step process by first installing the pillars and letting them set up. I then bedded the action normally using Steel Bed. The pillars I used matched the action perfectly. I only had to cut them to length to...
  5. Hogshooter

    Vote, Muzzle device on your rifle

    Run thread on suppressors on most everything I shoot.
  6. Hogshooter

    Sidearms & Scatterguns Tic Tic Tic XDS

    Sent mine in the first few days of the recall. Called about it about a week later and was advised that they were estimating 6 - 8 weeks before return.
  7. Hogshooter

    How to make a suppressed LMT MWS run?

    BX...I also am running a YHM Phantom but it is a thread on model.
  8. Hogshooter

    How to make a suppressed LMT MWS run?

    Search is your friend...see this from a couple of days ago. http://www.snipershide.com/shooting/snipers-hide-semi-auto-rifles/211403-running-mws-suppressed.html
  9. Hogshooter

    Running the MWS suppressed

    Be sure you get the correct buffer and spring. I mistakenly ordered the wrong x-heavy version the first time around and had to sell it on here as Slash would not take it back since I had run it. Call him and tell him explicitly what rifle and stock that you need it for.
  10. Hogshooter

    Running the MWS suppressed

    I ended up putting one of Slash's ex-heavy buffers and rifle length spring in mine and it runs like a champ when suppressed or un-suppressed. With the stock buffer and spring it would lock the bolt back on 2 out of 5 rds. As a side benefit it made the recoil a little softer. When stock the bolt...
  11. Hogshooter

    Suppressors Accuracy of sub-sonic loads

    I am getting right at 1 MOA at 100 yds. using 10.4 gr. Trailboss behind a 170 or 180 gr. RN bullet. 1:12 twist 20" .308. velocity is 1040 FPS.
  12. Hogshooter

    Which phone OS? IOS or Andriod for ballistic calculators

    I have run Strelok and Shooter on both my previous Casio Commando and my new model Commando. Both are rugged water resistant phones. I have the extended battery on the new one and it will run better than 48 hrs. on a charge with limited internet use.
  13. Hogshooter

    AR-COMP powder for subsonic .223?

    I load a 69 gr. SMK over Trailboss and it runs 1040 - 1050 fps. Trailboss is real "fluffy" and fills the case nicely. Agreed that the 5.56 subs are only a tad bit more potent that .22 LR. but the fun factor is there when shooting suppressed.
  14. Hogshooter

    Sidearms & Scatterguns In the car pistol carry options.

    Commander or Officers .45 in a IWB at 4:00 at all times. A S&W Compact 9mm DAO (police trade in) with two full mags rides in the center console of my truck 24/7. I live in a rural area and no kids in my truck so I don't worry about theft or others accessing the 9mm so much. Much easier and...
  15. Hogshooter

    Suppressors Supressed Ruger 22 pistols

    My SRT Comanche is not sealed. The front endcap unscrews and comes with the spanner wrench to remove it. The Comanche is rated for .17 HMR and has stainless baffles. The rest of SRT's cans are sealed units.
  16. Hogshooter

    Suppressors Supressed Ruger 22 pistols

    My SRT Comanche sounds about the same as my Sparrow. The FRP is about the same, maybe a little less. The Comanche is a can that can be disassembled where you can clean the individual stainless baffles. The Sparrow is much easier to clean though. I put a thin coat of anti-seize on the internals...
  17. Hogshooter

    Sidearms & Scatterguns Question for you Glock guys

    Get rid of the cheapo plastic sights which and replace with quality metal ones. The plastic ones work but with any hard use the front one will shear off.
  18. Hogshooter

    Suppressors Supressed Ruger 22 pistols

    Ruger 22/45 Ruger 22/45 with Tac Sol 4" Pac Lite barrel and Clark internals. Suppressor is a SRT Commanche which I also run on a .17 HMR. Although not a Ruger, the pistol in the rear is a Browning Buckmark Sillouette with barrel shortened and fitted with a SilencerCo Sparrow.
  19. Hogshooter

    Suppressors What form of payment/checks does ATF accept?

    I have always done a personal check also. I also keep my checkbook reconciled so I always know the amount of money in the account.
  20. Hogshooter

    For Those Of You With Snakes & Small Children

    Terrible news. At my previous residence I had a neighbor that had two pythons, one was 16' and the other was 14'. He would let them out to sun in his back yard. I told him in no uncertain words that if they were ever on my property that I would make sure to run the tractor and bushog over them...
Top Bottom
Back
Home
Forums
Merch
Alerts