Search results

Search the forum Search Articles
  1. Hogshooter

    Gunsmithing removing a flash hider ?

    Re: removing a flash hider ? What is the length of the barrel ? Is is 14 1/2" plus the FH making it 16" total length or is it a 16" barrel plus the FH making it 17 1/2" total. If the overal length is 16" then the FH is pinned and welded as per ATF regs. If 17 1/2" total it's just very tight...
  2. Hogshooter

    Range Report Ballistics and zero from sub-sonic to supersonic

    Re: Ballistics and zero from sub-sonic to supersonic Just to give you an idea. My Gap .308 is zeroed at 100 yds. with 175 SMKs running at 2650 fps (with can). When I shoot my 170 gn. subsonic load running at 1050 fps, I have to dial in 12 MOA to zero at 100 yds.
  3. Hogshooter

    Good read on Wolf / Tula ammo effects on rifles

    Good report on effects of steel cased / bi-metal projectiles on your barrel and rifle. http://www.luckygunner.com/labs/brass-vs-steel-cased-ammo/#reliable
  4. Hogshooter

    I Sold My LMT MWS

    Re: I Sold My LMT MWS ......and probally sold it and more than doubled his money if it was in good shape !
  5. Hogshooter

    Sidearms & Scatterguns XDS

    Re: XDS Those of you looking for holsters I have found that the holsters that I have for my Glock 27 fit my XDS perfectly. Maybe just the few I have but they fit like a glove. I have not tried any SERPA styles which lock into the trigger guard so you may want to ensure that you have an...
  6. Hogshooter

    LMT MWS and heavy buffer

    Re: LMT MWS and heavy buffer Thanks for the replys. I went ahead and ordered one and the spring combo after emailing with Clint.
  7. Hogshooter

    LMT MWS and heavy buffer

    I run my LMT MWS suppressed most of the time. It functions great but I worry about about excessive wear since I know it is over gassed. Does anyone have any experience using one of Slash's extra heavy buffers with an LMT MWS to slow the action down a bit ? If so, does it run with no issues when...
  8. Hogshooter

    John Noveske dies Jan 5th, 2013

    Re: John Novenske dies Jan 5th, 2013 ....RIP John
  9. Hogshooter

    Suppressors Suppressor sound reduction by caliber/rifle

    Re: Suppressor sound reduction by caliber/rifle I for one am not too stupid to be able to put the asshole Caeli on ignore due to his people skills. The electrical engineering background that I have helped me figure that out.
  10. Hogshooter

    LMT MWS load

    Anyone here have a handload that they have worked up that shoots well in a LMT MWS .308 with the 16" CL barrel ? I just picked one up and ran a existing load thru it that my GAP .308 loves. That being 43.4 gr. of RL-15 behind a 175 SMK. The LMT shot it around 1 MOA. I didn't have any 168s loaded...
  11. Hogshooter

    Gunsmithing Bedding kits?

    Re: Bedding kits? Play Dough cleans up much easier and is cheaper.
  12. Hogshooter

    Mega MATEN thoughts

    I have been looking for a 7.62 gas gun for a while and ran across this one locally. I have not heard a lot regarding them as far as accuracy and function are concerned. This one was built by the owner after purchasing the upper and lower receivers from Mega using the below listed components. He...
  13. Hogshooter

    Sidearms & Scatterguns XDs (singlestack 45) vs. XD and XDM

    Re: XDs (singlestack 45) vs. XD and XDM I have an XDs and have put about 250 rds thru it. Great little gun and is accurate as all hell for what it is. The only issue that I experienced was intermittant failure to go into full battery lock up (short by about 1-2 mm). The striker would still...
  14. Hogshooter

    Tannerite

    Re: Tannerite According to the ATFE regs that are posted on Tannerites site you can transport it in it's 2 component form with no issues. Once you mix it it cannot be transported since it is now a binary explosive. No problem shooting it as long as it is not prohibited in your locality.
  15. Hogshooter

    Tannerite

    Re: Tannerite Correct on the 95 / 5 mixture. Thats what I use. I do not know how I came up with the 85 / 15 numbers. In response to Helters post. "I'd think you would need some potassium perchlorate in there to make it go boom from being shot..." <span style="font-weight: bold">Do not under...
  16. Hogshooter

    Tannerite

    Re: Tannerite Cheapest way is to make it youself. Roughly 85% amonium nitrate (34-0-0 fertilizer) and 15% aluminum powder by weight(Egay). Price works out to be about 80 cents a pound. You can buy up to 25 lbs. of 34-0-0 with no legal issues at all. Not quite as good as Tannerite but still...
  17. Hogshooter

    Gunsmithing Getting stuck screws loose?

    Re: Getting stuck screws loose? Drill the heads off wih the proper size bit. Once the heads are all off and you take the top rings off the screws should come out easily,
  18. Hogshooter

    Ruger Scout Rifle .308

    Re: Ruger Scout Rifle .308 "Jeff Cooper's philosophy was that the rifle should be able to <span style="font-weight: bold"><span style="color: #FF0000">incapacitate targets up to 200 kilos </span></span>at any distance where the shooter is able to place a bullet within the vital zone. The...
  19. Hogshooter

    Anyone here reload for 6.8 SPC ?

    Re: Anyone here reload for 6.8 SPC ? I am a member at 68forums also. Just looking for more info if any here have experience.
  20. Hogshooter

    Anyone here reload for 6.8 SPC ?

    Just starting to work up a load for my 6.8 SPC spec II on the AR platform using the new Hornady 120 gr. SST. Have any of you guys had any experience with the bullet ? The hot powder right now is supposed to be A2200 but I can't locate any local and don't want to pay hazmat just for a pound. I am...
Top Bottom
Back
Home
Forums
Merch
Alerts