Search results

Search the forum Search Articles
  1. G

    RCBS powder measure lid

    Got a real good deal on a RCBS powder measure with the micrometer off of ebay...but it did not have the lid cap. Was going to order one but found that the screw off lid from a 1lb Varget container, turned upside down fits just perfect with just the right amount of tension. I think it's alot...
  2. G

    Rifle Scopes High end scope's for the .308 enthusiest

    Re: High end scope's for the .308 enthusiest This is what I shoot on my 308. NXS 8-32 with NP-2DD..love the extra mag. so I can use it to spot.
  3. G

    Rifle Scopes Scope choices for Savage 110.Ba .300wm

    Re: Scope choices for Savage 110.Ba .300wm Oh one more thought...the NF NXS 8-32 would look bad a$$ on that BA...looks like they were made for one another!!!
  4. G

    Rifle Scopes Scope choices for Savage 110.Ba .300wm

    Re: Scope choices for Savage 110.Ba .300wm I wanted to get back into shooting after my son went into the Air Force and start reloading again. I bought a Savage 10FLCP-K and a Wotac 4-14 to start off with. Well, 14 power is nice but I wanted something with more power on the range. I looked...
  5. G

    Rifle Scopes Wotac 4x14 Tactical Scope

    Re: Wotac 4x14 Tactical Scope I had one, gen 4, and had a problem that Matt sent me a gen 5 right away...great scope and customer service..I loooked around for an upgrade,higher mag., and the only one that I upgraded to was a NF NXS 8-32...for me anything in the middle or above was not worth...
  6. G

    Rifle Scopes nxs 5.5x22 or 12x42

    Re: nxs 5.5x22 or 12x42 I have an 8-32 NXS and seldom go above 24...but at 300 and 400 I have to go to 32 to read bullet hits. I don't think I would want the 5.5-22 now that I have the 8-32...only if I plan to use it for hunting at close range, 100yd shots. It's just really nice to be able...
  7. G

    I shouldnt give away this secret.....but

    Re: I shouldnt give away this secret.....but Just tried Mink oil, out of the can KIWI, been using it for neck resing and it's silky smooth. So seeing this thread, I just went out and loaded some bullets by just dabbing my fore finger and middle finger on the mink oil then rubbing those and...
  8. G

    SMK 175 + Varget Load Work-Up

    Re: SMK 175 + Varget Load Work-Up <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KS</div><div class="ubbcode-body">I've never owned a 308 yet that didn't shoot 44grs of Varget/175mk well (Kriegers, Walther, Schneider, factory tube). Even after doing a good...
  9. G

    SMK 175 + Varget Load Work-Up

    Re: SMK 175 + Varget Load Work-Up <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Leaddog</div><div class="ubbcode-body">6 minutes at 100 yards? I've never seen that much. Based on your velocities of 2302fps to 2726fps, the most elevation change you should see is...
  10. G

    Help me analyze my ladder test

    Re: Help me analyze my ladder test <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cconn</div><div class="ubbcode-body">I just started into longer range shooting. Shot this ladder test today @ 375 yard, farthest I can shoot in my backyard currently. This is also...
  11. G

    SMK 175 + Varget Load Work-Up

    Re: SMK 175 + Varget Load Work-Up Sorry if I offended anyone. My gun is just a stock Savage FLCP-K, 24" 1-10 twist. with a NF NAS 8-32. Have done this ladder test with other weight bullets and have had the rate of climb as Vol. goes up. This was takin at a 100yd range since the closest...
  12. G

    SMK 175 + Varget Load Work-Up

    Re: SMK 175 + Varget Load Work-Up <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: LRS_Ranger</div><div class="ubbcode-body">My SPR does pretty good for me with 45gr of Varget under a 175 SMK. BR2 primers, and fireformed Federal brass... Gregg Jacob I would load...
  13. G

    SMK 175 + Varget Load Work-Up

    Re: SMK 175 + Varget Load Work-Up I've started to work up a load for 175SMK's with Varget. Was goin to shoot 2 strings, one at 200yds and one at 300yds, but went to a 100yd range and shot this ladder string. Will be going and shooting at 200 and 300 when the weather gets better to validate...
  14. G

    Rifle Scopes Torqueing scope rings?

    Re: Torqueing scope rings? 6 years ago my son got into racing and I had to buy a good torque wrench to work on the carbs. I have a Snapon 5-40inlbs screwdriver. This I am now using for scope rings and tighting to 17 inlbs. Through the years I have used it on alot of different application...
  15. G

    Rifle Scopes anything as good as NF for less money?

    Re: anything as good as NF for less money? I just bought a NF 8-32 NXS and it's an investment for me. The reason I say this is I'm a photographer and sold one of my prim Nikon lens to get it. I bought the lens 4 years ago for $1200 and sold it, due to inflation etc, for $1400. Good quaility...
Top Bottom
Back
Home
Forums
Merch
Alerts