Search results

Search the forum Search Articles
  1. Hogshooter

    Gunsmithing 1911 ejector - Follow Up

    Re: 1911 ejector Phil, thanks for the tip. I was going to use a little dyekim to mark the position and then cut the notch on a mill at work. The small triangular file idea does sound better though. Looking at the notch on the old ejector, I do see how it would be real easy to go too deep with...
  2. Hogshooter

    Gunsmithing 1911 ejector - Follow Up

    Re: 1911 ejector lol..got it out with no issues. now just waiting for the new one to come in,cut the notch and install.
  3. Hogshooter

    Gunsmithing 1911 ejector - Follow Up

    Re: 1911 ejector Thanks for the reply. Hopefully it will pop right out once I get the pin removed since I can wiggle it a little presently. I have heard Springfield puts a little locktight on theirs when they install it, hopefully Colt doesn't.
  4. Hogshooter

    Gunsmithing 1911 ejector - Follow Up

    Question for you guys. I picked up a stainless Enhanced Compat Commander recently and I need to replace the ejector. I looks like it has been broken off. This pistol should have the extended ejector but the one thats in it is the length of the standard short one. I say it looks to be broken...
  5. Hogshooter

    Suppressors Aftermarket Glock Barrels

    Re: Aftermarket Glock Barrels 427 is on the spot . I run hard cast lead. Another reason is the aftermarket barrel on the 10 mm doesn't give me the Glock Smile on my cases due to better case head support. Not an issue if you do not reload.
  6. Hogshooter

    Suppressors Aftermarket Glock Barrels

    Re: Aftermarket Glock Barrels I am running a KKM on a G21 and a LW on a G20. Both were drop in with no issues. The KKM is the better barrel of the two IMO.
  7. Hogshooter

    Gunsmithing .45 guru's

    Re: .45 guru's I had the same issue with a Glock 21 running a KKM barrel, HK USP, and a Colt Gold Cup. I loaded a batch of 230 gr. hard cast RN to the same OAL as factory 230 gr. RN. None of the pistols would go into battery on the majority of the rounds unless I gave the back of the slide a...
  8. Hogshooter

    Gunsmithing Best method of Star Chamber Cleaning?

    Re: Best method of Star Chamber Cleaning? How about a Dewey AR chamber brush. Works for me.
  9. Hogshooter

    Suppressors New multi rifle can

    Re: New multi rifle can Try pasting this into your web browser ! http://www.google.com/cse/home?cx=010955838166721108978:qcbx5qqy10o&hl=en
  10. Hogshooter

    Magpul stocks

    Re: Magpul stocks Steel, Thanks for the input on the PRS. I have not gotten behind one as of yet. I have two rifles with CTRs on them and for their intended purpose they work fine. The M93 is on a suppressed varmint rig currently. I am going to swap out the lower with one with a CTR and see...
  11. Hogshooter

    Magpul stocks

    Re: Magpul stocks Thanks for the replys. That F93 stock looks identical except that it uses the stock buffer tube.
  12. Hogshooter

    Magpul stocks

    I currently have a Magpul M93A2 carbine stock with strike plate on a 18" AR. I am thinking about replacing it with a Magpul PRS stock. If I replace it, is there a market for these discontinued M93 stocks and if so can anyone give me a idea of what to list it for ? I have no idea of what they...
  13. Hogshooter

    New Guy with a few questions

    Re: New Guy with a few questions Regular SPS would be cheaper but if you are planning on suppressing it then the cost of having the regular SPS threaded and the fact that you can sell the Hogue for more than the flimsy SPS stock you are probable close to the same money wise.
  14. Hogshooter

    Thread Protector Removal

    Re: Thread Protector Removal A small strap wrench from the hardware store does wonders. I use one all the time on my suppressors when they are really tight.
  15. Hogshooter

    subsonic .308?

    Re: subsonic .308? Sounds like that you are still sonic as you can hear the sonic crack. I am loading 10.4 TB behind a 180 RN and all you hear is click and ping. I am shooting at 100' ASL and 60 deg.
  16. Hogshooter

    Hunting & Fishing Hog Huntin Question

    Re: Hog Huntin Question That VTR shooting 3/4" or 3/4 MOA at 300 yds. ?
  17. Hogshooter

    Will 1 in 11.25 twist stabilize 185gr subsonic?

    Re: Will 1 in 11.25 twist stabilize 185gr subsonic? I shoot a 170 and 180 gr. round nose at 1040 fps out of my 1:12 LTR and it is stable at 100 yds.I have not shot it on paper past 125 yds so I can't tell when it looses stability and starts to tumble. I am at 100 ' ASL
  18. Hogshooter

    Photos worn out barrel

    Re: worn out barrel Out of curosity, what type of groups were you getting with the barrel in that condition ?
  19. Hogshooter

    Suppressors Running a Barret M82A1 with a suppressor.

    Re: Running a Barret M82A1 with a suppressor. I would listen to Barret and abide by their advice since they ought to know from past experience.
  20. Hogshooter

    Gunsmithing Pistol mag. adjustment ?????????????

    Re: Pistol mag. adjustment ????????????? Does the slide not stay open on one mag or on all mags ? If it does not stay open on multiple mags then it is more than likely an issue with the slide stop. What make and model of pistol is it ? The slide stop tab that is engaged by the follower in the...
Top Bottom
Back
Home
Forums
Merch
Alerts