Search results

  1. bobke

    6.5 Grendel

    So, another very short test with Lever today with 129 ABLR’s in Lapua brass with 7 1/2 primers in 20” Satern cut rifled barrel. 30.0, 30.5 and 31.0 at approximately 2.28 OAL. 30.5 yielded 2472/4.0SD. 31.0 got 2512/2.6SD. Had some moderate powder compression with 30.5, more so with 31.0...
  2. bobke

    Rifle Scopes What's the REAL story on SWFA?

    Have several current SWFA’s that have been in play for quite a long time, and looking forward to the reboot. As are many, not too patient with new product intro leadtimes.
  3. bobke

    Rifle Scopes What's the REAL story on SWFA?

    If not possible to reveal specific details at this time, any chance to share what other mfg’s product/lines would compete with the new SWFA proposed offerings?
  4. bobke

    6.5 Grendel

    Took a brief look at Lever today. 92D/50-60RH, 5-7SSE-pretty good conditions. Just a short test-ran 30.0/30.2/30.4 with Sierra 123’s, RP 7 1/2 in Lapua brass at 2.270 OAL. 2517/2514/2539, with no pressure signs in 20” Satern cut rifled barrel. Seems like there’s plenty of room to move up a...
  5. bobke

    6.5 Grendel

    Used to use a lot of 31+ of CFE223 with 123’s and stayed in the 2550-2575 range, with some powder compression at near top loads in my guns, actually getting 2650ish in a 24” Satern cut rifled barrel, but backed that down to 31.2 over time to spare Hornady brass. Use AR Comp as my current ‘go...
  6. bobke

    6.5 Grendel

    2620 is impressive from an 18” barrel. How are primer pockets holding up? Still manageable in full summer temps? Would think you may have succeeded in squeezing all of the juice out that load.
  7. bobke

    Eric cortina seating depth

    Diggs-Nice result, and proof that following a process works. Good job. Have 130 ELD’s I’ve been shooting in CM bolt gun-will have to give them a go in x47, though 123 Scenars have been excellent to date.
  8. bobke

    6.5 Grendel

    Or… https://ballistictools.com/store/small-and-large-primer-pocket-gauges Or… https://www.brownells.com/reloading/measuring-tools/case-length-gauges/swage-gage-primer-pocket-gauge/?sku=
  9. bobke

    6.5 Grendel

    These are pretty handy for determining level of degradation of primer pockets. Pretty sure they came from Sinclair, and have saved me from wasting components on brass at its life’s end.
  10. bobke

    6.5 Grendel

    I have gone as high as 27.4 ARC with all good primers (205M/41/450/BR4/71/2’s) and bullets in 120/123gr range with good results in Hornady or Lapua brass, though for my purposes and getting 2525-2575ish velocities from 18-24” barrels, don’t find need to extract a whole lot more out of the...
  11. bobke

    6.5 Grendel

    If you have any 8208, have run 108’s with 28.5gr in Hornady brass to 2655 avg of 5 shots with 11 SD. Have some 108’s and my ‘go to’ Grendel powder, AR Comp, and a 20” WC barrel and will report back. 27.0 ARC with 120 Scenars is money at 2550 avg of 10 shots in 20” Proof and 22” WC barrels.
  12. bobke

    Eric cortina seating depth

    If you were to contribute something substantive to the conversation, other than an opinion, I’d give you consideration for same, in spite of a difference of views. Coward?…Nah.
  13. bobke

    Eric cortina seating depth

    Seems apparent who’s a joke…and an asshole to boot!
  14. bobke

    SOLD WTS GEISSELE SD-E

    I’ll take it. PM your PP info.
  15. bobke

    SOLD 22 ammo Eley, lapua

    And I’ll take the Eley Match 700 rds/14 boxes. Please PM payment details.
  16. bobke

    SOLD Eley Match 700 rounds $230

    Sold or back up?
  17. bobke

    Replacement for 8208 XBR IN AR-15 ?

    Just curious, as AR Comp was not included in your test, but you have noted how well it’s done with 55 Bergers in your previous testing on site. It’s cooler burning, pretty temp stable, runs in a similar burn rate to many of these powders-though perhaps on the faster side, and is finally showing...
  18. bobke

    Replacement for 8208 XBR IN AR-15 ?

    AR Comp is another option if you can secure a supply. Use 22+ gr with 75gr Hornady BTHP with 16”WOA and 18” Noveske. Accurate, pretty temp stable and good SD/ES numbers.
  19. bobke

    Optics ARC M3 35/36 XHigh/1.375 Rings…Sold.

    Sold to Bataction. Thx.