Search results

Search the forum Search Articles
  1. shootrj2003

    Christensen Arms Ranger 22

    Actually ,I was sort of agreeing with you,where you got some kind of twisted idea I needed an insult from ,I don’t know,I even wished you good luck on your new rifle,I guess maybe your attitude might be why your company doesn’t appreciate you. Have a good day
  2. shootrj2003

    Adding iron sights to Bergara

    They work , on the fifty foot indoor range,I only had to go 1 click up,an 2 left to be dead on ,set the scope up today so now it takes a minute or two to change from one to the other,for whatever reason I might want too.I have set screws to apply tomorrow,and I made them into grubscrews for...
  3. shootrj2003

    Windage issues on new BMR

    Well, this is some months later but take the scope off and put a straight edge on the scope rail it should be parallel to the barrel. If it is,your scope could be defective, , remount it on the rifle , turn the windage all the way to the left( or right) then count your clicks all the way to the...
  4. shootrj2003

    Bergara BMR Barrel detached?

    Does the HMR barrel disassemble from the Semi reciever ,like the 10-22 or the REM.597? I’m not familiar with that rifle.If it does it is a fairly simple assembly,the BMR has a barrel threaded to the action,most actions that are screwed or pinned are not going to be shipped,….are not ABLE to be...
  5. shootrj2003

    Christensen Arms Ranger 22

    800 is a serious chunk of change for any gun,my Bergara BMR is my most expensive .22, I like guns and love shooting but it will have to be a really good gun to get me to buy one at todays prices,I have what I need to shoot targets or hunting .good luck with your new rifle ,most rifles in my...
  6. shootrj2003

    Adding iron sights to Bergara

    it is now a finished project… almost,I had three 8x32 set screws ,for some reason after tapping the holes and running the set screw in the screw siezed and I could not get it out it also work hardened so a drill couldn’t touch it . I had to heat the whole base red hot and let it cool by air to...
  7. shootrj2003

    Adding iron sights to Bergara

    I have to add this the rear is great the front is ..uh.. well unique! Others are not available ,if they are let me know,the best front I’ve “seen” is the No Dak that exists only in rumor and allegations,but would be perfect ,for a .690 bbl, another stickie point! A custom mount could be made $.
  8. shootrj2003

    Adding iron sights to Bergara

    This it so far,the front sight is not secured yet it’s probably gonna use set screws ,1 on each side.
  9. shootrj2003

    Who’s done the full run?

    ,it’s not a waste of money if YOU have the skills.You know- instead of paying some other guy for HIS skills?I have had to pay others ,BUT only for machine work ,headspacing etc. these things I could do but the one time cost doesn’t make sense when he does it for the same cost.I have been...
  10. shootrj2003

    Adding iron sights to Bergara

    The parts are ,tsr200L,rear sight,comes with a front sight ,ts157,tech sight bull bbl adapter,you should get the sight adjustment tool( $5) Weaver rail TO 9,(Amazon) this the best I could do and it’s not here yet so I can’t know if there will be a glitch in the works I have not figured on. But...
  11. shootrj2003

    Adding iron sights to Bergara

    Escape velocity, Here’s what I arrived at after heading off on one tangent ,this was an M1 carbine front sight ,bushed and adapted for the threaded portion of the muzzle,sight was less than $20 at Numrich,an NECG rear was thought of but the numbers said with it the front sight needed to be...
  12. shootrj2003

    Adding iron sights to Bergara

    His problem , was as mine , not getting another rifle , but installing irons on one he owns and a Bergara , to boot , as is my BMR , it is a problem , and , if he’s like me a challenge. The Bergaras are great rifles , one of the few new rifles made of plastic that ARE great platforms , this...
  13. shootrj2003

    Bergara BMR Carbon

    What sights did you use for this,I’m working on an idea,but still open to suggestions,thanks
  14. shootrj2003

    Who’s done the full run?

    Maybe you shouldn’t have sold her rifle,she was happy with it.
  15. shootrj2003

    Iron/ aperture sight set ups for Bergara BMR

    All ideas are welcome,I do have some of my own ,I’m researching
  16. shootrj2003

    Accessories Found Bergara HMR Spacers

    Anymore available?
  17. shootrj2003

    Gunsmithing Should I install pillars in a McMillan HTG?

    I pillar bed nearly every rifle that I want to shoot well, because everything they make stocks out of ( except metal ) is softer than metal ,so, in time tightening a screw will grind and / or and wear it away bit by bit,maybe ,yes ,way longer than will make a difference,depending on how often...
  18. shootrj2003

    Opinions on High Standard 22 rifle

    You did not say what model,I have three jc Higgins mod29,30,31 all made by high standard high quality good shooters worth$150-250 maybe 350 todays crazy prices
  19. shootrj2003

    Very strange wood M40 stock!

    That was my very first thought when I saw it,they made the blooper gunner a sniper!
  20. shootrj2003

    Gunsmithing Should I install pillars in a McMillan HTG?

    Pillar bed everything you get you hands on!bhu
Top Bottom
Back
Home
Forums
Merch
Alerts