Search results

Search the forum Search Articles
  1. PhOnEpHrEaK

    Ruger Precision Rifle Discussion

    Alright, I posted this originally over in the optics section, but I found a few comments across the web about similar experiences with the RPR but no resolution. I picked up an RPR in 6.5 last week, bought a Sig Tango4 6-24x50, and mounted it with Mk4 high rings. I zeroed the rifle and the...
  2. PhOnEpHrEaK

    Rifle Scopes Zero/ scope help.

    So I took the scope off as well as the base. mounted and remounted. I measured the base it seemed in spec. Where the action is drilled for the base seems slightly off to the right, and the rail feels/looks like it drifts that way. However.. I remounted the scope and zeroed at 100 again. Once...
  3. PhOnEpHrEaK

    Rifle Scopes Zero/ scope help.

    So last night I pulled the scope, rings, and base. I measured the base and rings and they seem to be good. That tells me that the problem is the scope or the rifle. Possibly the holes are drilled off center? I haven't tried to mount the scope on another rifle yet. I may pull the mk4 off of my...
  4. PhOnEpHrEaK

    Rifle Scopes Zero/ scope help.

    Alright, I disengaged the zero stop and tested the turrets. I have 16.5 mils from top to bottom, book states it should have 15. The scope is mounted in mk4 superhighway rings, on the 20 moa base that comes on the RPR. Pell I almost have 7 mils right and 5 mils left.
  5. PhOnEpHrEaK

    Rifle Scopes Zero/ scope help.

    First time using a scope that actually has a zero stop in it, so any tips here? I used the books instructions to reset it, but something seems off here. The rail base is the 20moa that comes on the RPR. The rings are Mk4s.
  6. PhOnEpHrEaK

    Rifle Scopes Zero/ scope help.

    So I picked up a. RPR, 6.5 cm, threw a tango4 6-24x50 on it, got her zeroed. Went to check my elevation adjustment and can only dial up 8 mils. Full range is 15, the RPR has a 20moa base so shouldn't I have more room room for adjustment?
  7. PhOnEpHrEaK

    700 sps tactical 308 1-12 twist.

    FCS, have an AICS, but when I'm shooting alone I tend to just single feed. Fish Dr, how different are the 155 Palmas compared to the 155 Scenar? I tried the Scenars and my patterns at 100 and 200 looked like a shotgun went off, so I didn't bother trying them any further.
  8. PhOnEpHrEaK

    700 sps tactical 308 1-12 twist.

    I have 168 smk, 175 smk, 178 ELD-M; 4064, and reloader 15 for powder. So far I've bought low amounts until I can find what the rifle likes. I had success out to 850 with 168 and 175 FGMM. Usually my rifle is around .5-.75 MOA with me shooting. I'm convinced it could be better with a better shooter.
  9. PhOnEpHrEaK

    700 sps tactical 308 1-12 twist.

    I'm looking for loads specifically for this rifle. I'm planning to take it out to close to 1000 yards soon, and I've just started reloading my own and looking for recommendations. I have close to 2000 rounds through the rifle, but those were all factory. I have read the 308 sticky, but I'm...
  10. PhOnEpHrEaK

    LOWA Zephyr GTX Hi TF

    I've had two pair over the last 5 years. With my latest getting close to 3 years. They truly are an amazing boot and I will be buying another pair when needed.
  11. PhOnEpHrEaK

    Palmetto State Armory PA 10...

    I have been considering picking up an AR10 type rifle. I was wondering what kind of accuracy I can expect from Palmetto's version? If anyone has any experience with these, your input would be appreciated. Thank you.
  12. PhOnEpHrEaK

    Bad Fed Auto Match?

    I burnt through two boxes last week in a walther p22, 22-15, and a mk 2. No issues at all.
  13. PhOnEpHrEaK

    Member Link Up Western PA - Pittsburgh

    I live about 45 minutes from Pittsburgh. I'd possibly be up for some shooting at some point .
  14. PhOnEpHrEaK

    Member Link Up Ohio Shooters!

    I'm in Salem Ohio, anyone around that area?
  15. PhOnEpHrEaK

    Sidearms & Scatterguns 1911 Problem

    Already did. You know its a scary feeling when you go to drop the trigger on your carry gun and find that it doesn't want to move.
  16. PhOnEpHrEaK

    Sidearms & Scatterguns 1911 Problem

    It was the set screw. I guess it creeps. Thanks for the help JM.
  17. PhOnEpHrEaK

    Sidearms & Scatterguns 1911 Problem

    I do, is it possible the screw worked its way in to far?
  18. PhOnEpHrEaK

    Sidearms & Scatterguns 1911 Problem

    Today I noticed a problem. I went to decock my 1911, and I couldn't pull the trigger, it feels as if the safety is engaged, or the grip safety isn't engaging. Any idea what the problem could be? At the moment I have it completely disassembled.
  19. PhOnEpHrEaK

    Sidearms & Scatterguns Why you DON'T like Glock.

    Feels like a brick. Grip is weird. Its not a 1911.
  20. PhOnEpHrEaK

    I could use a few ideas (Youth Shoot)

    Every summer me and a friend of mine put a shoot together for a bunch of the youth in the area (13-17). We do all sorts of stuff. Skeet shoot, .22 stuff, a walk through the woods with targets set at various locations, some long range stuff with my .308. Well this year we want a few more ideas...
Top Bottom
Back
Home
Forums
Merch
Alerts