Search results

Search the forum Search Articles
  1. BLAWTON

    Gunsmithing barrel/action thread question?

    Re: barrel/action thread question? NO: has no bearing on anything to do with the function or performance of the rifle....
  2. BLAWTON

    Gunsmithing barrel/action thread question?

    Re: barrel/action thread question? No.
  3. BLAWTON

    How To Properly Clean Your Precision RIfle

    Re: How To Properly Clean Your Precision RIfle KG is the best copper solvent i have ever used followed closely by Wipeout patchout. 150 rounds is a good number some people just shoot till accuracy drops off. Everytime i clean my no comp guns its a few patches then let it sit for a hour of so...
  4. BLAWTON

    Range Report Accuracy difference if any?

    Re: Accuracy difference if any? From my findings, no it had no effect on accuracy. Depending on the type of material used and the dimensions of the bullets a special bore might help for the solid bullets but thats about it. If you gun shoot them then of course it would make no difference.
  5. BLAWTON

    Range Report Ballistics Results from Using Lapua Radar Data

    Re: Ballistics Results from Using Lapua Radar Data My friend starting messing with the 300 grain lapua bullets. We took their data and hit within 3" of point of aim and 1500 yards... I think the stuff is spot on!
  6. BLAWTON

    Range Report Barrel Temp?

    Re: Barrel Temp? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 03psd</div><div class="ubbcode-body">Well doesnt that just shoot to shit all range myths about barrel heat! Could it then be extrapolated that the cold bore shot is also a myth? NOTE: Not clean...
  7. BLAWTON

    Range Report ladder test // nodal tuning WORKS!!!!! pics added

    Re: ladder test // nodal tuning WORKS!!!!! Im putting together a camera system that you can use a wireless setup to put a monitor or some type like a labtop at your bench and you never have to worry about knowing whats going on again. Great way to sort brass and prep for long range BR and...
  8. BLAWTON

    Velocity question.

    Re: Velocity question. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sniperghost</div><div class="ubbcode-body">Hi guys, I’m out of the lands .10. I’m going to try the RE-15 next time to see if there it’s going to be any differences, and also the IMR-4895. I...
  9. BLAWTON

    Case capacity of 7mm cartridges

    Re: Case capacity of 7mm cartridges Why are you searching for case cap? I would be looking at overall performance or a case that fits the function that you are trying for before looking at how much you can stuff in it. Like the 7wsm or saum will perform with the best of them and your not...
  10. BLAWTON

    Anyone ever seen this happen?

    Re: Anyone ever seen this happen? If its not a problem with the OAL being to long or the die set to low and hitting the neck i would guess that there is a bunch of bullet tension and its just causing those long neck to bulge like that. With 3 firings on the case i wouldn't see it being to...
  11. BLAWTON

    6.5x47 lapua

    Re: 6.5x47 lapua Stick with the H extreme powders you will be alot happier in the end. Varget and 4350 both worked well in mine. I used the 4350 with the 130 and up bullets and varget with the lighter ones.
  12. BLAWTON

    Load/powder help for 300 WSM

    Re: Load/powder help for 300 WSM Spitting the 165's i would suggest you start with H4350 or H4831SC.
  13. BLAWTON

    Gunsmithing Big bullet jump - throat damage?

    Re: Big bullet jump - throat damage? A false shoulder is the best way to form cases. The COW is a messy PIA and i will never do that again. It doesnt always form the case all the way like a real bullet and charge does. No a jump of even .25" isnt going to harm your throat in the gun...
  14. BLAWTON

    RL17 6.5x47L 1st test close range.

    Re: RL17 6.5x47L 1st test close range. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: eddief</div><div class="ubbcode-body">Nobody wants to say it, I will, RE15 is temp sensitive and dirty to boot. I know there is a shit ton of RL15 lovers but I never did care...
  15. BLAWTON

    RL17 6.5x47L 1st test close range.

    Re: RL17 6.5x47L 1st test close range. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: flims</div><div class="ubbcode-body">can any tell me if there is a precision mic for setting up how much you want to set back the shoulder? checked RCBS but they dont have a...
  16. BLAWTON

    need advice on neck turning

    Re: need advice on neck turning <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: former naval person</div><div class="ubbcode-body">Unless he gets the "dreaded do-nut" and has to either ream or turn in and expand out. </div></div> To address this problem...
  17. BLAWTON

    need advice on neck turning

    Re: need advice on neck turning <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: GreatGonzo</div><div class="ubbcode-body">Hombre, you should only have to turn the brass one time. </div></div> Yes and sometimes if you leave them a touch thick you can re turn them...
  18. BLAWTON

    4895 powder question

    Re: 4895 powder question Its really close but as always start light and work your way up. The IMR is a bit slower but not by much IIRC
  19. BLAWTON

    different Grip texture with bubble wrap

    Re: different Grip texture with bubble wrap Nice job!
  20. BLAWTON

    Powder Question for 300 WSM load.

    Re: Powder Question for 300 WSM load. What he said.
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts