Search results

Search the forum Search Articles
  1. A

    The Fix from Q

    Just received some Norma 6mm Creedmoor Golden Target Match with 107's. Hopefully they feed better than the Berger VLD 105's, Hornady does. If not I may have to talk to Q and see if the new 6.5 extension will work.
  2. A

    The Fix from Q

    I wish it was 3.2", I'd be hounding them about a magnum bolt face and so a PRC instead of having one built.
  3. A

    The Fix from Q

    With the 308, I have zero issues with the supplied P-mags and also ASC mags. The ASC is about half the price of the Lancer.
  4. A

    The Fix from Q

    That would be the easiest way to cut the groove in it deep enough for the stock to slide inside it since there is only bolt back there.
  5. A

    The Fix from Q

    2" Delrin rod is cheap enough to try whittling different shapes and turning down the diameter. Maybe even try grip tape or whatever.
  6. A

    The Fix from Q

    I've never really messed with bag riders before but would the flat bottom be ideal over a rounded bottom?
  7. A

    The Fix from Q

    I think this might depend on the round, the heavier i shot the longer i shoot.
  8. A

    The Fix from Q

    I have some of those gift rounded troy rail covers that would probably lock into the tiny rail section for the rear but that would look stupid as all get out. I also have a bunch of delron rods that i could probably cut one out of and it would pretty slick and i could play with the length and...
  9. A

    The Fix from Q

    I'm looing for a rear bag rider that would fit well with the skinny profile of the stock, something similar to the MPA but preferably on that doesn't weigh a pound. Is there a nylon or any other lightweight option out there? I would just print one but my 3d modeling skills suck at best...
  10. A

    The music industry will have to shut Tom MacDonald up. People are "listening."

    Tom is currently being stopped from being added to Billboard charts because of the data collection agency they use. So they are effectively shutting him down because they can't have an independent artist at #1. The pfister copies aren't being counted, only downloads.
  11. A

    The Fix from Q

    The bullet length, as well as, the the lower shoulder is what we were discussing previously as the problem to this since it was really designed for tipped Hornady's and 308's. This has me curious if this new extension will work for 6CM with 105 Berger's since they hot the chamfer and deform the...
  12. A

    Need a buffer system for suppressed 11.5 SBR

    I did the Geissele buffer and spring with a piston upper but it works with an adjustable gas block with another upper i have. Both run the silenced at all times.
  13. A

    Ruger American essentials?

    I was using RL17 with a conservative load and getting just shy of 3k so you should be good.
  14. A

    Ruger American essentials?

    It's possible but they were purchased years apart and the last one I bought was the 6 creedmoor predator rotary mag version. They had the same goofy weaver with 6 or so slots. I have just standardized on 20 moa bases on my bolt rifles. Mine liked the Berger 105 VLD Hunter btw.
  15. A

    Ruger American essentials?

    I have had 3 of these in 6mm cartridges and I still have the 243 I bought. The one thing I can say that I consistently did with all of them was replace the the factory scope with an EGW 20moa base. just clean the threads in the receiver extremely well and use blue Loctite. Best $35 I spent.
  16. A

    The Fix from Q

    I have been trying to figure this out as well. The magpul sling is even worse with an external frame pack.
  17. A

    Heavy-for-caliber bullets in .223 WSSM

    I am looking at doing a 243 WSSM with 115gr and you make it look promising. what mags are using and have you had any problems with the rounds moving around in the mag?
  18. A

    Hunting scope without spending a fortune....

    I would say look at something 1x-6 or 8 in the upper part of your price range. If youwant to spend a little more the razor 1-6 or creedo 1-8 are good. I hunt in GA and these ranges seem to work better than starting at 3x or 4x. On 1x they like having a red dot but you crank it up if need be...
  19. A

    Advice on a silenced 308 gasser?

    I'm going to chime in as I have had problems with 308 DPMS pattern 308. I bought a V7 lightweight BCG and they recommended the below buffer system. After assembly I find out that the gas port on the Xcaliber barrel was shaped like wine glass and way to small after sending V7 and they fixed it...
  20. A

    The Fix from Q

    You're not wrong, my educated guess is that is was originally designed for 308 cartridge and not the 6.5 with the shorter case body and longer bullet.
Top Bottom
Back
Home
Forums
Merch
Alerts