Search results

Search the forum Search Articles
  1. stillbuster

    Gunsmithing crowns

    Re: crowns Another good one; says a 11 degree produced best accuracy from a machine rest: (Bart Bobbitt) Subject: Re: Crowning Crowning a rifle barrel, in simplest terms, is shaping the muzzle so the rifling's edge is protected from impact. Most factory barrels have a round, convex-shaped...
  2. stillbuster

    Gunsmithing crowns

    Re: crowns Found this also: Author unknown. When someone says "target type crown" they really mean a crown machined with precision in mind. It really does not mean a particular type, although two types are normally used. One is the 11° cone crown and the other is stepped (two 90° planes...
  3. stillbuster

    Gunsmithing 5R touchup 1st multi icam attempt

    Re: 5R touchup 1st multi icam attempt <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HasgunWilltravel</div><div class="ubbcode-body">Found it, this is the best I have seen. Yours looks great though...
  4. stillbuster

    Gunsmithing crowns

    Re: crowns http://riflestocks.tripod.com/targetcrown.html http://www.ct-precision.com/crown.html
  5. stillbuster

    Range Report New guy range report: Remington 5R .308, pic's

    Re: New guy range report: Remington 5R .308, pic's The same about 1 moa high. After coating the action/barrel and glass bedding I have not had this problem again. The past three cold bores have all been zero and then my follow up shots only climb about 1/4 moa, that is when I do my part and...
  6. stillbuster

    Range Report New guy range report: Remington 5R .308, pic's

    Re: New guy range report: Remington 5R .308, pic's I am very satisfied with mine. As far as the Xmark goes, good luck. I also got mine down to 2 lbs for about 100 rds then it started to increase in pull weight. I re-adjusted and could not get it to safety check at the same weight of pull. I...
  7. stillbuster

    Where Has All The .22LR Ammo Gone?

    Re: Where Has All The .22LR Ammo Gone? Just got in from my local wal mart. As of last Monday all bullet sales are limited to 6 boxes of each caliber/brand. The days of going and getting a "brick" of .22's are over at wally. The clerk said that as of right now shotgun shells are not effected...
  8. stillbuster

    Gunsmithing Remington 700 triger help

    Re: Remington 700 triger help http://www.benchrest.com/forums/attachment.php?attachmentid=2957&d=1143568290
  9. stillbuster

    Gunsmithing 5R touchup 1st multi icam attempt

    After doing my first bedding job using devcon I had a few places that I wanted to touch up such as a chip in front of the recoil lug, a chip under the tang, along the top edge of the barrel channel and I wanted to clean up the lines inside the mag/trigger well. I went ahead and textured the...
  10. stillbuster

    Feedback Good Guy List

    Re: Good Guy List Saito is 100% GTG. Very good communication.
  11. stillbuster

    Rifle Scopes Totally disgusted with Leupold

    Re: Totally disgusted with Leupold My observation from meeting some of the Leupold LEO/MIL reps at SHOT. 1. Very knowledgeable guys about their product. 2. Eager to discuss their products. 3. Did not want to talk about the future changes and any ideas LEO Q Public (the end user) may have...
  12. stillbuster

    Rifle Scopes Leupold Mark 4 owners?

    Re: Leupold Mark 4 owners? +1 TMR It took a little time for me to adjust to it. I just mounted one on my partners rifle this week and he is going through the same thing. It is a very short adjustment time though, couple of hours behind the rifle dry firing and shooting I got comfortable...
  13. stillbuster

    Remington 5R

    Re: Remington 5R page 2 gun kote page 3 teflon moly basically same as cerakote but instead of ceramic it is teflon and molybdenum sulfide http://www.brownells.com/aspx/ns/store/catsearch.aspx?c=751&p=4798
  14. stillbuster

    Remington 5R

    Re: Remington 5R I used this: http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=95810 But from now on I will use this: http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46719 For what some people are paying for 1 coating job I bought all the tools, coatings and...
  15. stillbuster

    Remington 5R

    Re: Remington 5R http://www.snipershide.com/forum/ubbthre...374#Post1098374
  16. stillbuster

    My 5R

    Re: My 5R <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 1943m1garand</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: stillbuster</div><div class="ubbcode-body">I used wood carving chisels and patience...
  17. stillbuster

    My 5R

    Re: My 5R <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: lineman711</div><div class="ubbcode-body">Stillbuster...is the throat on your rifle extremely short? Mine is so bad that I'm going to have to send it back to Remington. Just curious if any others have had...
  18. stillbuster

    My 5R

    Re: My 5R I used wood carving chisels and patience. Once you get past the outer glass skin the rest is like putty. I used some long bolts with same thread as action screws. I wrappped them in tape until it made a tight fit inside the holes in the stock, just like you would do if you are doing...
  19. stillbuster

    My 5R

    Re: My 5R I was having some issues with my cold bore shifting, I am hoping the bedding will take care of that. As far as the paint goes I got tired of my rifle standing out like a turd in a punch bowl on the firing line.
  20. stillbuster

    My 5R

    Installed Badger M4 bottom metal then bedded bottom metal, action and 20 moa base with devcon. Covered action, barrel, bottom metal and scope base in OD green Gun Kote from Brownell's I had to build up around the outside of the bottom metal with devcon and shape it as the hs stock is a bit slim...
Top Bottom
Back
Home
Forums
Merch
Alerts