Search results

Search the forum Search Articles
  1. E

    PMG Precision Rifle Class in AL

    Re: PMG Precision Rifle Class in AL Put me down for a slot. I'll try to get a check out by Tuesday.
  2. E

    6XC Loads

    Re: 6XC Loads H100V turned in slightly better accuracy @ 400 <span style="color: #3366FF">years</span> than the old stand by H4350 load. I don't think that I have that long to wait. ;-)
  3. E

    Thinking of adding a karsten adj cheek piece B&C

    Re: Thinking of adding a karsten adj cheek piece B&C They also have a "C" version. Same hardware as a B version but no notches. I put one on a B&C.
  4. E

    6XC Loads

    Re: 6XC Loads Update on my 105 Hybrid load development. My latest round of loads gave me a 5 shot group of 5/8" at 200 yards prone from a bipod. But 4 shots were 0.45" center to center. I am using Norma brass, CCI 200 primers and H4350.
  5. E

    6XC with 105 Berger Hybrids

    Re: 6XC with 105 Berger Hybrids First, there is a thread in the Reloading Depot for 6XC. That being said, I have had very promising results with the 105 Hybrids. I have worked up a load that has given me a 5 shot group of 5/8" at 200 yards prone from a bipod. I am using Norma brass and CCI...
  6. E

    6XC Loads

    Re: 6XC Loads I am trying Berger 105 Hybrids in my 6XC. Looks very promising so far. During OCW load develpoment today I had two groups right at 1/2" at 200 yards. I will update as load development progresses.
  7. E

    What twist barrel for 6x47

    Re: What twist barrel for 6x47 Most would say use a 7.5 twist to make sure. I've seen some that use an 8 twist but why risk it.
  8. E

    Lapua Brass

    Re: Lapua Brass And if you still have problems you can send the brass to me.
  9. E

    Berger hunting VLD - 185 vs 190 in 300 WSM?

    Re: Berger hunting VLD - 185 vs 190 in 300 WSM? I shoot a GAP in 300 WSM with 175 SMK's and 64.5 grains of H4350. While this is not a 185/190 VLD Berger, my point is that you might want to try H4350. It is relatively insensitive to temperature and shoots well under 1/2 MOA. By the way, I...
  10. E

    Merry Christmas from The GAP Team

    Re: Merry Christmas from The GAP Team Merry Christmas, a little late, to everyone at GAP. My Crusader has been fantastic. I wish everyone a great and prosperous New Year. I know that I could use one. And I may be looking at rebarreling in 2012.
  11. E

    Lee Auto Prime

    Re: Lee Auto Prime I have a Lee that is very old. When I started loading for a 300 WSM I had to get a file/dremmel and open up the area around the shell holder. That might work for the Cheytac.
  12. E

    Gunsmithing BAR trigger job?

    Re: BAR trigger job? I don't have an answer but I will be watching this thread since I have one also.
  13. E

    Berger Hybrids

    For those of you shooting the Berger hybrids, where are you seating them relative to the lands? I am looking at the 6mm 105 hybrids specifically but I figure that the others should be similar. At least relative to jump or no jump.
  14. E

    .300wm - .300wsm

    Re: Loads for .300WM-.300WSM My 300 WSM load consists of 65.4 grains of H4350 behind a 175 SMK using Norma brass and CCI magnum primers. Comes out of a 24" 11.25 twist barrel at about 3040 fps. Groups are right at 1/2 MOA but a lot of that is me. I have had numerous groups with 4 shots in...
  15. E

    6XC dies

    You guys have provided great advice before so here goes another one. Which would you prefer, the Tubbs sizing die or a Redding S neck sizer along with a body die? I realize that at least part of the question depends on if you like full length sizing or necks only with the ocasional shoulder bump.
  16. E

    Rifle Scopes 5-20x50 Weaver Tactical extension tube

    Re: 5-20x50 Weaver Tactical extension tube It is only about as big around as an oil can but it's pretty long.
  17. E

    Rifle Scopes 5-20x50 Weaver Tactical extension tube

    Re: 5-20x50 Weaver Tactical extension tube Yea. I figured one from another manufacturer might work.
  18. E

    Rifle Scopes 5-20x50 Weaver Tactical extension tube

    Has anyone found an extension tube that will work with one of these?
  19. E

    6XC Brass

    Re: 6XC Brass Thanks for the help. The Tubbs site was the ticket. I am shooting Norma in my 300 WSM and it has been working well.
  20. E

    6XC Brass

    Does anyone know where I can buy Norma 6XC brass? Midway has it but I haven't found anywhere else.
Top Bottom
Back
Home
Forums
Merch
Alerts