• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Search results

  1. P

    6.5 x 47 vs 6 GT

    Looking to purchase new or build a long range rifle (1200 yards or so) for ringing steel or other target (no hunting). Looking at cartridge choice. 6.5 x 47 Lapua (I have 200 unfired cases), or 6mm GT. Hard choice, so welcome opinions. I do not compete, this is just for personal pleasure...
  2. P

    Howa Detachable Mag Options?

    Just wondering what detachable mag setup options are out there for Howa 1500 actions (not mini action). I know of the Howa kit, and use it on a Howa 223. The bottom metal and mag are polymer, but it does work just fine, and is inexpensive. But, was look for something a bit nicer on my next...
  3. P

    How to Determine Optimal LOP?

    I will be shooting off a bench and would like some idea of how to determine optimal length of pull (LOP). If it matters, I am 6' 1" and have 34 - 35 sleeves. Given that many rifles used here have adjustable LOP, I wondered what you have found works well for you. I expect this will change for...
  4. P

    Bell & Carlson Target/Competition Stock

    I cannot find much info on the Bell & Carlson so wondered if anyone here has any experience with it. Besides your opinion of it, I am also wondering how large the barrel channel is. It is difficult to find a stock similar to this with an adjustable cheekrest..., for a Howa, at a price I...
  5. P

    Howa Barrel Work - Gunsmith Recommendations

    I have a Howa action with the original factory barrel still in it, that I would like removed to be replaced with a custom barrel that is threaded, chambered, and crowned (no muzzle brake). I will be using something like Brux, Krieger, Bartlein, or other cut-rifled barrel. I am looking for...
  6. P

    MDT HS3 vs LSS-XL Gen2

    For those that have either the MDT HS3 or LSS-XL Gen2, could you share any pros and cons that you have experienced with either? I will be using a Howa action with a heavy barrel in 6.5 x 47, perhaps with a barrel nut. The chassis will be used for shooting off the bench, normally a bipod or...
  7. P

    KRG Bravo (Howa) - Interesting Differences vs Pics

    I just received my KRG Bravo for a Howa action. I am not sure some small differences I see vs photos is due to running design changes at KRG or because it is a Howa. See photos. Every pic I have seen shows the fore-end attached with 8 visible screws. Mine has six with no visible screw...
  8. P

    KRG Bravo - Barrel Weight and Balance

    I am awaiting arrival of my ordered KRG Bravo (Howa), so need a barrel to fire the 6.5 x 47 rounds. I do not have any good idea of barrel profiles and lengths that would achieve top accuracy, but also not adversely affect rifle balance. I prefer a heavy barrel, at least 24" - 26" long, and...
  9. P

    KRG Bravo - Spigot Mount & Harris Bipod Direct Mount

    I am preparing my order for the KRG Bravo (for a Howa action). For those who have this chassis, perhaps you can share your opinions on two options I am considering. The Spigot Mount and the Harris Bipod Direct Mount. Did either make any material improvement in rifle stability, accuracy...
  10. P

    Magazine Selection Questions

    I am fairly set on using a KRG Bravo for building a Howa based 6.5 x 47 rifle. I am not familiar with magazines, so some help is appreciated. KRG offers AICS "pattern" mags in 5 and 10 round, with or without restrictor plate. What is this restrictor plate for? For 223? Is it removable...
  11. P

    Prefit Barrels in a KRG Bravo?

    Can anyone speak to the fit of a barrel nut in the KRG Bravo chassis? The KRG website says of the Bravo... “Barrel contours accepted: 1.25” for 4” in front of action face, then 1.20” straight to end of foreend. A 1.25” straight cylinder will fit but we fell that the clearance is too minimal...
  12. P

    KRG Bravo Fit & Finish

    I am considering the KRG Bravo chassis for a Howa 6.5 x 47 setup. However, I notice on many photos of the Bravo the stock and fore-end have poor alignment. See below. This is seen on both sides. I know the Bravo is inexpensive, but still. Has anyone else seen this, is it fixable, or...? It...
  13. P

    Howa: Can AICS Mags Fit w/o Action Modification?

    I am building a rifle using a Howa action, and am considering using bottom metal that uses AICS mags. I have read that it may be necessary to trim about .050" on some part of the action to make the mags fit. True? I am not so enthused about cutting or grinding the action. Phil
  14. P

    Bradley CheekRest BUL Model Review

    After putting my first bolt action rifle together, it quickly became evident I needed additional cheek rise. It was also evident that lowering the scope would not work as the 50mm objective was ¼” from the barrel, and I needed .35” - .40” cheek rise. Besides, I already had the lowest Burris...
  15. P

    Cheek Riser - Non Permanent?

    Are there any recommended cheek risers that do not require permanent modification of the stock? Something that just fits on the top by adhesive, or...? Or is a strap & Velcro type arrangement the only option? I am not sure how secure the Velcro type arrangements are. If a Karsten is my only...
  16. P

    Most Accurate Mag Fed Bolt Action Cartridge?

    The 6mmBR is widely regarded as one of the most accurate cartridges around , but since mag feeding with it looks iffy at best, what is the most accurate mag fed cartridge? This is just for target shooting only, at 100 - 600 yard max. Phil
  17. P

    Howa Mag Fed 6mmBR?

    Has anyone modified or know how to go about setting up a Howa action to mag feed 6mmBR cartridges? I found some info on GeoVario LLC - Web Access, but not specific to Howa. Not sure what is required or if it is even possible, but if someone else has ventured down this round, would love to hear...
  18. P

    Front Support: Accuracy vs Portability?

    I seem to be something between a BenchRest shooter and tactical person, interested in top accuracy but also not wanting to shoot a rifle that is all but locked down and can shoot "free recoil". I shoot at my local 100 yard range and am unsure of the impact of choices vs accuracy. I have a...
  19. P

    Gunsmithing Base Bedding: Two Different Approaches

    I have a Howa action to which I am going to bed a Murphy Precision base (MurphyPrecision.com - Scope Bases, Rings, and Assorted Shooting Accessories.). I need to do this since with rear screws tightened down, there is a .006" gap between the front part of the base and the action. I can either...
  20. P

    Can't Get AR-15 Ejector Back In

    I took apart my AR-15 bolt and am stuck trying to get the ejector plunger, plunger spring, and retaining roll pin back together. I am using this Sinclair device to aid me. Sinclair AR-15 Bolt Vise | Sinclair Intl The screw pushes in on the ejector and spring, compressing them and holding...