Search results

Not going to use these in the foreseeable future so I’m freeing up funds. Krieger blank 31” 1.25” straight contour 6mm 1/7 4 groove .236/.243 $375 PVA osprey ARC coup de gras barrel Never fired or installed. Order specs below. $600

Throwing this up as it doesn’t seem like I’m going to have a chance to use it anytime soon. I have 2000 rounds of Spark Munitions 6 Creedmoor 105 Berger hybrid, Perterson brass ammo. I’ll sell the whole lot for $3k, which is what I paid if a single person wants it. Preferably FTF within 2hrs of...

Bought this slide as a new take off and sent to Atei. $675 slide and holosun 508t-rd $400 slide only 1k rounds or less on slide, had another slide milled and switched to a closed emitter optic so I don’t need this one . I have a few extra rmr and holosun mounting screws and possibly a plain...

I know some people here have them with proof barrels. Does anyone have or have experience with the factory 16” 223 barrel? I’d hate to have to spend another $900 right away to make it shoot well. I wasn’t interested in them at $3k but I’ve been seeing as low as $2400 and its tempting. I haven’t...

20” chrome lined and 24” SS, less than 100rds through either. Just too many irons in the fire. SS $450 CL $350 Both currently have surefire socom brakes installed but will ship with the original LMT 3 prong flash hiders. I will leave brakes on for $75 extra Prices shipped conus

Unopened case of 1600 Hornady 178 bthp $575 shipped conus

Wilcox Raptar ES This is the rangefinder and eye safe laser version. It does not have onboard AB. Clean unit but it’s redundant so im seeing if there’s any interest. Comes with factory accessories except for cd with instructions. It was loose in the packaging and scratched on my receiving it...

I intended to chop this one to 18” but I found one in stock. 20 rounds of 175 smk/m118lr clone through the barrel. $675

Used but functions perfectly. Includes pouch/bag. Has some finish wear from trying to clamp onto area 419 rails in the dark. $300

I have a couple Lmt Mws’s and a handful of barrels. A few are converted Noveske’s which are armalite pattern and the others are factory Lmt. I run the armalite bolt in the Lmt carrier with the Noveske barrels. Same .068” dia firing pin, protrusion, etc. As best I can tell the Armalite bolt has...

New never fired 1/10 26” 300wm barrel with their 2 port brake/suppressor mount. It’s from and A2 conversion kit and has the fluted shank and lighter contour than the a1 and older barrels. My current 300wm barrel still has plenty of life in it and I don’t need this one sitting around. $1350

Clearing out stuff that I don’t need/use. Not looking for trades other than what is listed 2yr old Revic Pmr428, mil turrets, rx1 mil reticle version. Hardly a mark on it, ballistic computer works perfect. It has maybe 1000rds under it, mostly 308win and 6.5 creed. Original box, caps, etc...

Spuhr sp-4808 in good condition with original box, leveling wedge and extra screws 34mm, 1.7” height, 44moa $275 Trade interests +\- cash Parts Surefire socom muzzle brakes 5/8x24 Magpul d60 and d50(308) 2011 mags 9/38 Sr25 mags 10/20 kac and larue Optics Vortex Razor 6-36 mil NF Atacr 1-8...

Gen II srs 308, 16” 1/8 twist, rear monopod. The chassis probably has close to 3k but this barrel probably has 1.5k through it and is usually good for 1/2 moa, sometimes 3/4. It has some finish wear around the edges on the hand guard. One 6rd mag $2300 rifle only I also have a full length gen...

I have a really good shooting 24” noveske 6.5 creedmoor barrel fitted for my mws. It doesn’t seem to care for 140s that much but 123 and 130 Elds will generally hold 3/4moa or better and hasn’t been too picky on load development. My go to is hdy brass and 43.7 h4350 which gets me about 2875fps...

I'm wondering if I should try switching over to the sidewinder setup for my desert tech SRS and 338 ultra. I've got a handful of barrels from 6.5-338 in 3/4-24 and 5/8-24. I've always been annoyed by how much carbon builds up in the can and then gets into the threads with the BA mount setup...

Noveske 308 barrel converted to run in a LMT. I got it used but initially it was a reliable 3/4moa or better barrel with fgmm or similar and in load development with 175smk and 168 it was less than 2moa for basically every combo. I had a random baffle strike with a socom 762 on it and after...

Spuhr SP-5002 $300 Geissele Super precision p/n 05-424 1.5" height, 30mm tube, 20moa cant $225 (sold) Both of these are what you see is what you get, no extras. Spuhr Qdp-4602 1.5" high, 34mm tube, 20moa cant, qd levers. Includes box, leveling wedge etc. Don't have a picture as it's still on...

Silencerco radius with all original accessories and box. 95% condition due to small blem on housing near objective lense and some wear on calming surface of mount. Solid 1k yd ranging during the day and over 2k at night. $1000

Excellent shape. Got this one in trade but the non-illuminated T3 reticle isn't for me and my uses. I have the box, flip caps, sunshade, etc for the scope. $1800 I'll get pics up later Trades +\- cash Nx8 2.5-20 or atacr 4-16x42 mil-xt only Gen 3 razor mrad Holosun 508t Trijicon rm06, rm09...