Search results

Are you guys modifying the freebore on the saami spec for the bolt guns or just running the saami reamer? If so, what are you running? I tried searching but nothing came up. Thanks!

Page 95 of the manual calls it a barrel assembly tool…I call it a wrench. I understand this has a nut and a holder might’ve even been the proper term. Regardless of all that, does anyone know where I can buy one? My Googlefu is failing me and I can’t seem to find one. I thought SAC might...

Anyone know where there is one in stock? I’ve already got a anvil30 head just need the tripod and coming up empty. I don’t have time to back order one, replacing a reaper rest and got a hunt coming up. Thanks.

I have a 10-50x60 Sightron SIII coming what ring height do I need to put on a Talley 20MOA base on top of a Rem 700? Thanks, I don't have scope in hand to get the measurements on my own. I am guessing high but want to get by with as low as I can.

So does everyone turn the necks automatically to make sure all your brass has a uniform neck or do you not mess with it? Reading mixed reviews on whether it is very beneficial.

Viper PST, Sightron or Nightforce??? I haven't looked through any of them so I am at a bit of a disadvantage. I have hear a lot of good things about all of them but are the Sightron and NF scopes worth that much better than the Viper? I'm using the scope to go on a 6.5 Creedmoor to steel and...

I have decided to have a 6mm built. Just can't decide which one. I have went from a BR to 6x47 to 6mm Creedmoor and back several times. I have a 6.5 Creedmoor and I love it but just wanting another gun. I decided on it over the 6.5-284 because of the difference in brass and slightly better...

Why don't I see them used on custom rigs as much as some of the others? I have one and it has been a good one. I just wondered if there was something I didn't know. Getting ready for another build and seeing if I just got a good one or they just aren't popular for another reason. Thanks guys.

So I have a 22-250 that a buddy is interested in buy but wants to know the twist. How can I check it without putting a marked rod in it? It is a Savage model 10 w/ supposedly either a 1:9 or 1:14. Thanks...I ask because I doing really want to mark up a cleaning rod if I can keep from it.

I have narrowed my load down and now I am ready to start messing with OAL. I saw in the sticky loading write ups to start at .010 but it didn't say how far to go? When testing how far off the lands will y'all go looking for a load that shoots well? Thanks.

Since there isn't a bolt to open how do you watch for pressure issues on an AR? Is it primer flattening? Thanks, loaded up first test loads for AR and want to be safe with my testing.

To prevent jacking the other load development thread. I read the link and was very taken back at how much sense it appears to me the OCW makes over Ladder testing...the guy broke it down so even a dummy (me) or caveman could understand. Anyway...what do you do? I have been ladder testing but...

This ladder test is my first and was done at 325 out of a 6.5 Creedmoor and 25" barrel. Sorry, our chronograph died prior to shoot these so I didn't get velocity so that makes it worse but here is what it looked like, for some reason the picture is upside down, 3 was the lowest shot and 12 was...

Do you clean the brass prior to resizing and depriming, after or both? I ask because a buddy of mine said to do it before so you don't get the carbon stuff in your resizer and scratch future cases. So I did it that way and then realized the primer pocket wasn't getting clean which was one of...

I am going to start messing with my 6.5 Creedmoor and get a load worked up. I saw these bullets and their BC is higher than the Amax's (140gr) and thought about trying them. They aren't Barnes money and within a dollar or two of the Amax. Anyone used them and do they like'em?

Anyone shot one yet? How is the accuracy and do they need much work to punch paper and play with steel out to 1k? I saw one pop up at the bottom of the screen and thought it was different looking.

Anyone have a good brass catcher for an AR? I bought a Colt AR from my buddy that drives tacks with my his reloads so I am going to start reloading for it. Chasing brass around sucks though so thought someone might have a good idea on a catcher. The net deal you see at Midway looks cheesy but...

New to the game and I am just wondering with so many options how do you pick a specific bullet. I understand the whole gun will pick it but there are hundreds to choose from if you count weight and different manufacturers. My buddies are telling me to stick with Berger or Nosler but I am one...

I am going to put together a prairie dog rig. I had my mind made up on a 22-250 and a buddy told me to go with the 223 because the recoil isn't as much and you get to see more of your kills. He says that is the most fun part of dog hunting. I plan on reloading because I have bought all the...

Is there a big difference in glass clarity between the two? Not a Bushnell fan but looking like they might be the best value for a newbie trying to put a rifle together "semi" cheaply. If I bump up in price it is going to be a Vortex but I can buy 2 Bushnell's for the Vortex that I would buy...