155

bought some 155 palmas from another member here and just want to get an idea of what other guys are using. will be shooting 550-900 yards. stick: rem 700 aac .308 20" 1-10 components: fed brass cci 200 powder choices: 1. imr-4064 (have 24lbs prefer to use this powder) 2. blc-2 3...

I just got some 155 smk palma (the new ones) & I'm trying to figure out what legnth to start load development. I have the hornady/stoney point case legnth tool. If I set them .010 off the lands there is not much bullet being held by the case (around 1 mm). Is that safe or ok to load them that...

I am loading 155 A Max in my 5R. I have found that my rifle has a very long throat. What have ya'll found these to shoot well at. Right at lands or jumping? I am still working on loads and just looking for advise to save time. The longest I can load to and still mag feed is about 2.840.

Anybody shot it and how does it compare to handloads of 155 grain palma match or 155 scenars? Don't know much about reloading or anything so don't bust my balls if this is a stupid question! About to do a GAP 18.5 or 20 with a Bartlein or Rock barrel at a 1:11.25 twist. Will this twist work...

who here has used these two bullets in their gas guns and what results are you getting with it? which do you prefer to shoot more? and what are your loads for both rounds??

just curious what some of you guys shooting 155 scenars at a 1000yds are getting. list your: barrel length known velocity Altitude or DA. Real world dope at 1000yds. Thanks

Bought a 100 bullets from a member here sold as 155gr Lapua Scenars from the groupbuy. I wasnt in on the group buy but unless it was for seconds I think I got screwed. I finally got around to loading some up today and randomly weighed 10 and NONE were within .5gr of 155. All ranged from 154.0 to...

I am trying to find the thread that questioned if the 155 Scenar really has a B.C. of .508. I tried to search for it without any luck. Any help would be appreciated.

Ok. Here is the problem. I have been shooting long range practical shooting for quite some time now. When i started I used the 175SMK with great results Lately I have been shooting the 167 Lapua Scenar (got a serious deal om some factory ammo) But I had allways wanted to try the 155 Scenar. The...

Tomorrow my M1a supermatch will be here, it's got a 1 in 10 twist barrel. Most of my shooting with it will be at my 700 yd range here at the farm, and hopefully get in a 600 yd high-power match now and then. The only .308 bullets I keep around are the 155 Lapua Scener, and the other day I...

Tried some 4064 in and OCW test and the promising results were at speeds we're not supposed to see with a 22-inch barrel. FA 63 Match cases, reloaded 1x before WLR primers Seated 2.82 or so OAL New ordinary match barrel from Springfield Armory Temp 80 F, humidity probably 30-40. 45.0 (last of...

PV has them in stock. Just bought 1k.

Does anyone know if anybody has Lapua 155 Scenars in stock other than Midway?

I'm glad we have someone like Bryan Litz testing for real BCs, but I'm still toying with the A-Max as a usually more available option to the SMKs, the Lapuas, and the spendy Bergers. What I *really* like is he's giving us average G1 BCs so we can use something other than Sierra's software and...

I just put 20 155 grain Lapua Scenar on my scales (one electronic/one manual) and found that they ranged in weight from 154.1 grains-154.5 grains. NOT ONE WAS 155 GRAINS FROM 5 DIFFERENT BOXES! Is this normal for Lapua? (my SMK almost always come out at the exact weight specified... the...

So I have had these loads sitting in the gun room for 8 months or so and finally got around to shooting them . The loads were .308 Winchester Brass , CCI BR-2 primers , 155 Nosler custom competition bullets loaded with 46.0 , 46.5 and 47.0 grains of Varget . 46 grains poked out at about 2890 fps...

I've been shooting 175 smk's in my stock Savage. I would like to try the 155gr Scenars but thought I read that my barrel might be to fast to shoot them well. Is there any truth to this? Has anyone been running them through a 308 Savage?

Midway says they stopped making it? Anyone know? If so, whats a good powder for 308 in 26 inch barrel with 155 scenars? Thanks

Who has them right now? Also 308 laupa brass? Thanks again.

My gun shoots the FGM 168 under a half MOA. When I load the 155s. It shoots like shit. Here is my load. 46.6 grs Varget Lapua brass BR2 primers 155s COL 28.26 Any suggestions.