155gr

what powder do you like, and what velocities are ya getting, I threw some loads together.. i'm launching this thing from a gps defense rem700 18". Since i have a ton h335. i'm gonna try that. I hear r15 and TAC work well too? just want to see what ya'll are getting?!

The thread Lapua Scenar 155gr, wrong BC? almost figured that out. My measurements indicate the 167gr doesn't have a lower BC than the 155gr - Lop-wah just transposed the numbers. The 470 BC claimed for the 167 gr is right on for the 155. The 155 Scenar is a great bullet, but it's not magic...

I want to develop a load with 155gr bullets for my 300WSM that will serve as long range target/hunting load. I've seen comments on the Lapua Scenar, Serria Palma and 155 gr bullets from other manufactures. Any recommendations on which one might be the better combination bullet?

I managed to go shoot a little today. I was checking a load using some 180gr Nosler BT bullets. I had some loads left over from when I first started loading for this .308. One of the loads used a 155gr SMK Palma bullet- I have had those bullets for a long time. They had the tightest group of...

I have been shooting 175gr. SMK in my .308, but was thinking about trying some 155's. I remember a post a while back, where somebody said that they where shooting a 155 load that would come close to the ballistics as a .300 WM as far as wind and drop. I couldn't find it with the search engine...

Was given some 155gr bullets want to shoot them in a M1A, have several military cases to load. What powders and primers do you think that would work..

Gettin back into reloading. Got my feet wet in the past, but sold everything cuz ammo was cheaper than my time was worth to me. Anyhow, with the current predicament we are in, I ordered another press and am fixin to get all the other stuff I need in the following weeks. I got a 20" barrel on...

I'm looking to get some info all together in one place on 155-gr HPBT loads, starting of course with the "old" Sierra 155. Also interested in any successful loads from those of us on the 'Hide. FWIW, I tried some Lapua 155s over TAC and the OCW over five charges resulted in NOT One Charge...

Hi all just tested the new 155gr Palma MAtchking from Sierra #2156 it is replacing the old one as the palma projectile but for now the old 155gr projectile will stay as a matchking. so they are longer than the old projectile by .055" and have .035" less baring surface base to ogive makin g them...

How do these bullets rank in terms of accuracy? Is there an appreciable difference between moly coated and uncoated?

I'm finding a lot of firsthand reports on 155-gr Lapuas and the occasional A-Max, and I've just finished up a box of Nosler 155s and have access to some Berger 155.5s.... Except for the A-Max, anyone see differences in safe max loads between the various 155s? With both 4064 and IMR 4895, my...

like the title says, order away.

I have read the load data on this board for the 308. I have found very few if any that had a trg. I plan on using lapua brass, federal 210m primers, and 155gr scenars. I cant decide on which powder rl-15 or varget . varget seems to be very popular but some say it will burn the throat of you...

It seems the general consensus is that 4895 or Varget is good powder of choice for the 155gr. scenars... I have a boat load of RE15....anyone try it with win brass?? Not so sure how it shoots with lighter bullets..

Ballistically the 155gr. scenar seems the pretty good on paper for reaching out to 1000 for a .308...if it saves me up to 6moa at that distance why doesnt everyone catch on and start shootin em instead of the 175grs.???? what are the short comings on the 155grs.? if there so much better than...