208

About 250ct (all same lot) $60 shipped No trades

looking to try hybrid 100v in a 208 amax but any good load data would be a big help. I have a pretty large selection of powders, thanks hombre

Anyone use Retumbo for this? Specs will be Win brass, WLRM primer, 208 A-max at AI mag length or a little less. Rifle: 700 trued action, Krieger 10 twist 28" I have Retumbo on hand, but can't find data for it and 208's.

Does anyone have the minimum and the maximum data with this combination? My Hornady book doesn't show the 208's. Has anyone hunted with these? Thanks

Well i have been wondering about the 208 A-MAX & retumbo for the 300RUM since i heard hornady came out with the 208, but haven't heard much about them for the RUM nor could i find any data for this combo, and ive asked everywhere to no avail, so i finally bit the bullet so to speak, and ordered...

Anybody using the 208 amax's in a 300rum, just ordered some to try in the new 300rum, but can't find any data to get started, i'll be using retumbo,any help would be great, thanks Matt...

Do the 208's need to jump, touch, or don't matter?

What speeds are doing you best for the 208? Im having a hard time getting the vertical dispersion under MOA durring re-work up. Horizontal is in the 1/4-1/3 MOA but vertical is being stubborn. Ive covered 2750 - 2850 FPS with 74 and 75 gr charges of H1000 which is where my old load was...with...

How well will a 208 A-Max work out of a 1 in 11 barrel? Or how about 185 Scenars?

Revisited 208/210 grain bullets for the first time since getting Pressure Trace. RL-17 is "THE" powder for the heavies (in my short chamber, at least). 26" Schneider 1-11", GAP chamber 208 AMAX Hornady Cases 210M 2.930" COAL 2.200" OG (0.020" from the lands) Worked up to: N550: 45.5 gr...

I just got an email from Hornady with some new published data for the 308 Win with the 208 A-max. Here is what Hornady listed: 308 Win- 208 Amax, WLR primer, Hornady brass, Win M70 22", 2.80", 1:12" twist Varget- Start load: 34.9 @ 2100 fps Max load: 40.0 @ 2300 fps IMR 4064 Start load: 36.2...

I have a pss700 in 300 win mag and I was wondering, if anyone knows of a factory loading for the 208 A-Max in 300 win. I have the 190 grn federal and blackhills, but I have heard so much about the 208 grn A-Max. I do not reload yet.

I have a box of 208 Amax sitting around and I would like to work up a load for my 308. The twist in my tube is 11.25 at 24 inches. With that info where do I start? My normal load is 175grn SMK with 42grns of Varget .018 off the lands. Can I stay with varget, will the 11.25 stabilize the 208 and...

What kind of velocities are you guys getting with these bullets out of the .300WM? Have H1000, works well with the 190's Bergers and SMK's. My load is 80g H1000 215M Win. case 3100 fps out of an AI barrel with 3000 through it. -Jimmy

Hey, I have gone through the 308 load thread and haven't really found much there. Wondering if anyone has had decent luck with either the 208's or 210's out of a 308. I have a 1-10 twist rock creek at 22 inches and currently run 175 bergers out of it. Not even really sure if its worth it, but...

trying to see if a 208 a-max will stabilize out of a 1 in 12 twist 24" tube in a 300wsm or would I be wasting good ammo??? Also I would like to run it out to 1mi. thanks in advance hombre

Hi guys, Im over in england and have lurked on the forum for a long time although it must have taken 6 months for my registration to work out. This is a very intersting forum and the knowledge offered here certainly seems very well understood and thorough. Anyway, Im shooting a 300 Win Mag...

Anybody putting 208s through there 308 and if so could you shoot me some load data Thanks Josh

Im starting to work on some loads for my 300WM using the 208 gr. A-Max and H1000. The closest I can come to 208 in my on hand reloading data is 200, or 220, and I have been advised to just split the difference. In my Lyman 48th 200 gr HPBT max charge of H1000 is 80 gr. and a 220 RN maxes out at...

Was just wondering if anybody had any experience with this combo running it at a coal that will fit in a short action remington magazine and still feed. I have been thinking about picking up one of the sps varmints in 300 wsm and putting it in an extra hs stock that I have. I just don't know if...