375

Want to trade our m300 Praetorian 375 Cheytac with only 1 round through the rifle as a function check for higher end scopes. NF atacr, Kahles 525/624, zco, TT, March, etc. Some of the scopes in the 3-4k range might have to add a little cash to make it an even trade, but we can work that out...

Looking to replace my VERY worn McRees chassis on my Lawton 8000 repeater receiver, anyone have any idea who makes a chassis that will for this action?

Hi, I’ve seen a few threads that briefly discuss the EnABELRs, but can’t find much about people actually experiences loading and shooting the cartridge. (Of course the Applied Ballistics team does great with it). I am looking to get into ELR the next year or two and want to start building my...

Was wondering if anyone has any personal load data on the 390gr Hornady Atips for 375 cheytac. I have a couple boxes on the way and am new to 375 cheytac. I have a 10.5 twist barrel and hope Hornady is on the money with the recommended twist rate.

looking for a set of dies, nothing custom as far as chamber specs goes.

RATON, NM -- Billy Carter, a native of Spring, Texas, hit a 1 MOA target from a distance of 2.07 miles at the NRA Whittington U Long Distance Range last week. Carter improved the accuracy of his 2013 record, shooting a CheyTac USA M200 Intervention® chambered in .375 CheyTac topped with a Vortex...

I came back from the range sunday testing loads. Two bullets tested were the hornady 300 spbt and the sierra 350 match king. The load for the hornady 300 is 111 grains of IMR 7828ssc at a velocity of 3200 fps. the sierra 350 is 108 grains of reloader 25 at a velocity of 3005 fps. The rifle is a...

I am looking into interest in a group buy on the Bertram .375 and .408 CheyTac brass, if you have interest check my post in the Group Buy Section or send me an email. Dave http://snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1272944#Post1272944

Gentlemen, Here are some pictures of the first ever made .375 SnipeTac brass. The brass is made by Dieter Horneber in Germany. For comparison is a .408 CheyTac Cheers, Master Diver

looking for a recommended load for a new "to me " 375 Cheytac. are you loading to the lands .010 off , jamming etc also a good load for a 600 yd zero I have 350 smk and the 333 leigh projectiles also two star Jammison brass Thanks Bill

In direct reference to the 375 cheytac bullets, what is the advantage of a lead core jacketed bullet over a solid. In my opinion, the solid seems to be a logical choice as it is not prone to core stripping and has higher BC than a jacketed bullet. I would also think that it can be pushed...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: GLOWWORM</div><div class="ubbcode-body"> Here he is....Manners T3 stock with a Jewel trigger and 30 inches of Fluted Barrel before the 3" of brake with a Lawton 8500 single shot action. I have named him BIG MEDICINE...

Same info as all the other posts guys. What are your rifle specs and all the info you have on the load. Thanks

Hello, Just seach some load infos for .375 CT ( Jamison "2 stars" brass ) + SMK 350 grs with VV powders. What velocity can I expect with a 32" barrel ? What is the advertised BC of these bullets ? Thanks.

I got to paint another 375 CheyTac today. This one done in a "military inspired" desert theme camo. These rifles are awesome to see in person for sure. This one belongs to hide member KYShooter338. Pics are a bit less than top quality, but hopefully you can see it well enough to enjoy...

I know that the flatter a cartridge shoots the more room for range estimation error you have without it killing you. (think .223 vs .44 mag at 200 yards) I know that you still try to range as precisely as you can. But, how much additional "fudge factor" do you get with a .375 over a .338 at...

I know there is a big difference between these cartridges as far as range goes. I want to build a ELR rifle and am trying to decide. On average, how much of a difference is there in weight for the rifle itself between these? Can they be built to similar weights, or is it like a .50 and they...

What do you need in a scope for shooting at extreme ranges with a round like this? How much adjustment, magnifacation etc? Would the Premier 5-25 do it, or should I be looking at something else?

General Announcement; In the last few days there have been some design refinements to the ZA375/6.0-Cu, which add additional high-velocity stability. There is a very good chance this projectile will stabilize in the standard 11.5" CheyTac exit-twist. If you are interested, and not adverse to...

OK, so I am getting ready to start a build. I have settled on a Lawton 8000 repeater and a Lawton barrel. I want to do a 375 setup and have searched and researched for weeks. It is my understanding that projos and twists are very much up in the air right now. So, here is what I don't know: 1...