6xc

Action: kelbly atlas tactical short action Barrel: Krieger 26 inch MTU contour chambered in 6xc Stock: manners T4-A carbon fiber gen 2 mini chassis with area 419 arca rail 1 12 round mag Trigger: Bix n Andy TacSport Pro Gunsmith: Elemental Industries Scope: Bushnell HDMR 2 H59 reticle...

Surgeon 591 lefthanded w/small firing pin, trigger tech diamond trigger and 2 barrels, Manners T5A bedded for action, 350-3 times fired cases and die set. The bipod and scope DO NOT come with it. Load used in attached photo was 38.3gr h4350 with 105 berger hybrids out of the xc barrel. 6xc -...

Whidden 6XC Case Gauge Comes with Whidden .375 case comparator. $40 shipped No trades

Brand New Bartlein Barrel 26" M24 Contour 7.5t 6xc Chambered By GA Precision. 5/8x24 Muzzle 300 pieces of virgin 6xc Peterson SRP. For Impact Action $850 shipped.

Never been used. Bartlein M24 contour. 26 inches. 5/8x24 muzzle threads. 7.5 twist 5R rifling. Chambered by Area 419 for Impact Action. XCII Specs No trades. $700 shipped

Impact 6BR barreled action 29” Cerakote Black Heathen Brake Rd Count: 450 Comes with 50rds of loaded ammo in virgin brass. (No trigger included) 26” 6xc barrel with Rd Count of 225 Blasted finish Also comes with Heathen $2,250 shipped for all or $1,800 for barreled action and ammo. Please send...

6xc Redding Type S Match Bushing 2-Die Set with bushing. asking $225 shipped. Feel free to message me and I can text you pictures. For some reason my phone isn't allowing me to post pictures. thanks

Anyone KNOW for a FACT who makes Tubb's 6XC brass? I have been using Norma, but Tubb marked cases are quite a bit less. I was told that Norma makes the brass, but after talking to a gent at Tubb's SSS company....who claimed he did not know who makes their brass???....I am wondering what the...

Shooting 115 grain bullets........ The 6XC is creating a good buzz. Kind of a hassle to form. Needs a long 28" barrel and has to be hotrodded to be at peak. The 243 Win is winning some matches. But why not the 243 WSSM? I'm thinking overlooked potential here. The speedier of the three with a...

So I threw some loads together for the new 6XC rifle....no case prep at all and right out of the bag new brass. Started with 38.3gns or RL-17 and went up in .3gn steps....seem it likes it fast. Best group came in at 39.1gns. Seating the bullets (107 SMK's) in the lands. As you can see...

Well....I got to pick up my latest tool for long range bench shooting today. I know most of the folks here are into tactical rifles...and I am too....but just started playing the BR game and this is my first BR rifle. Brought it home and installed the base and scope. Will be loading up some...

Well I will be receiving my new 6XC bench rifle soon. Have Redding 3 piece comp. die set on the way and 300 cases. Here are the powders and bullets I have on hand: 107 SMK's...only a couple hundred 115 Berger VLD's 700+ 115 DTAC's around 500 Varget, RL-19, IMR-4350, and RL-15. Any...

Can a CRF barreled action chambered in 6xc be reamed to .243 win without setting the barrel back and recutting the cone breech and extractor slot? It appears that all of the relevant dimensions of the 6xc are the same or smaller than the .243--so my "non gun-smith" mind figures you could just...

Looking at the 6XC....just wondering if anyone here is shooting one and looking for input and load input. Take care,Stan

I made a poor choice on the brake as you can see. This thing kicks up a bunch of shit!!!! I loaded one cartrige at a time until I got ejector swipes then backed off a half grain and loaded fifteen rounds. I shot 5 before turning the chrono on and then ran 10 over it. I got a few errors so I...

Picked this up from TBA today. Remmy 700 McMillan A3 with Schneider 7.5 twist in 6XC. I hope to get trigger time tomorrow and will post a range report. This one took about 10 months from start to finish.LOL. I'm bettin it was worth the wait......

Been reading alot of this cartrige, anyone have one? whats the optimal barrel length

When painting up a barreled action what do you use to mask off the places you dont want covered? lug area, scope lenses, turrets, crown. is there a special tape for this or am i GTG with any old tape i have laying around? Thanks guys!! Im a rookie painter!

I have been reading about re17 since it came out and how it gives superior velocity so I bought a pound to do testing. I loaded one round at a time in 1/2 grain increments from 38.5 to 41 grains. 41 grains gave sticky bolt so I loaded 10 rounds each of 40 and 40.5. I set the chrono up today and...

I posted this on 6mmBR, but wanted to share it here as well. Preston and the guys at Surgeon sure can build a rifle. This is one of their rifles. Well, I finally made it out to the range to test out some loads. My prior load was: H4350 38.7 grains .010" off the lands 115 DTAC Wolf Primer...