7mm08

Custom Remington 700 with a brand new 24” Heavy Sporter 7mm08 Criterion Barrel Pre-fit Barrel installed with Remage nut. It has only had 4 shots fired through it. Timney straight trigger, Bolt has been fluted and has oversized bolt knob, seekins 20 MOA Base. Will also throw in factory stock and...

Got a new Dimension in 7mm08, I know its not a long range caliber or sniper rifle by any means, but I need some advice. When I first got it the bolt was incredibly stiff, not the action but just cocking it. Once you got it cocked it was nice and smooth but it just about took two guys and a mule...

Can you seat a 180 Berger VLD in a 7mm-08 case to about ~2.840"-2.860" and the ogive not go below the case neck? I was curious if this would work feeding from an AI mag and the bullet be out far enough to touch the lands and still feed from a mag?

Okay the questions first since the explanation and excuses are rather convoluted. Will a 280AI reamer clean up a 7mm/08 chamber that was run too deep? If so that is all the info I need. If not will a 7 RM clean up a 280AI chamber? First off I am not sure what kind of brain fart I had that...

Intro: Cal= 7-08, I have shot my pet load with 120gr NOS BT for years and love the performance. In the past I have messed with a 150 smk and it was ok. Now I want to take it (the gun) past 600 and out to 1000 (the 120’s shot 4” at 600). So I thought I must need the 150smk or similar and that the...

I don't have the rifle chambered yet but was preppeing some brass last night. As normal, using the Redding bushing FL sizer I get a small section of the neck unsized. Normally not a problem with correct brass, but when forming, will this cause a problem in chambering? Or will the camming...

Wondering if anyone is playing around with the 7mm-08 improved, and what barrel lengths are ideal. I just got in 3 26" barrels, and am wanting to cut them down, but not sure what is acceptable on the lower end... Dave

If anyone can point me in the direction of a manufacturer or gunsmith that can make AR 15 platform in 7mm-08 I would appreciate it. rick

Looking to stick with win brass dunno why..... Would you recomend necking up 243 or necking down 7mm-08? Never had to form brass before.

more pics of my 7mm-08

remington 700 action krieger barrel jewell trigger bell and carlson stock S&B PMII 3-12 USMC

Getting a new rig built. Light carry rifle for hunting. 1:9 #2 finished at 23" on a Stiller Predator. Anyone have favorite loads for the 7-08 ? thanks. Specs as requested per PM's.... 7mm-08 SPECS: Stiller Predator SS SA Stiller 20 MOA rail Leupold 4.5-14x50 LR 30mm Rem. BDL black BM...

does anyone have one or have shot one out to 1000 yds just wondering just seems to me like it would get there a lot easier than .308 and was thinking of rebarreling one of my ar10s to it