7wsm

I was using a Forster FL resizing die for my non-neck turned Winchester 7mm WSM brass but then decided to try neck turning just to even out the necks to get more consistency. Before the first firing after neck turning, my Forster FL resizing die gave just enough tension to hold the bullet, but...

Hello..I keep reading on here about the growing popularity/effectiveness of the 7WSM. I have a new Rem 700 Long Action and am planning on building a 300WM for out past 1000 yards, but the more I read it seems the 7WSM has better ballistics. So..which would you build?? I see some guys build...

had a quick question for you guys. I just recently picked up a hornady oal gauge and comprator. My normal load was 7 wsm with an OAL of 2.965" w/ a 175 smk bullet. I was getting hit or miss accuracy (.295-1 moa) mainly due to me loading on OAL vs o give I am assuming. So I use the OAL gauge as...

I have everything for my 7 build (Surgeon RSR action, AICS stock, moddified mag to feed WSM) except for the barrel which is on order from ROCK. So I have had some time to do as much research on 7WSM and better options. The problem is I jumped the gun and bought all the dies (redding comp set)...

I am trying to hit some real velocity with a 22.5" barrelled 7wsm. So far with 64 gns of 4831sc under a 162 Amax, I have reached a consistent 2835, without pressure--and great accuracy. I want to juice it up a bit more and I'm curious as to what others have found to be a max pressure load using...

I am trying to hit some real velocity with a 22.5" barrelled 7wsm. So far with 64 gns of 4831sc under a 162 Amax, I have reached a consistent 2835, without pressure--and great accuracy. I want to juice it up a bit more and I'm curious as to what others have found to be a max pressure load...

I just started loading for for my new 7WSM and need some starters for the 180 Bergers does anyone have some pet loads with this bullet?

I need to know what the neck diameter is for the 7WSM I need to order a bushing or two and I dont have any rounds to measure. Please help I need to order soon to get in time for a match.

I saw 4 7WSM's for sale in the firearms for sale section.I've never owned one but they look to be ballistic champions. Why do you suppose that these individuals have decided to sell these but keep their other chamberings??? Steve

Get some!

I keep hearing that its better to use LR primers in 7WSM instead or LR MAG. Please vote for what you use and please explain why.

Been running RL22 with 215M, Winchester brass and 180 Berger. Is anybody having better results with non-magnum primers in the WSM. Thanks, Dan

I got my 7wsm up and going. I chronoed my load of 66 grains of H1000, with 180 bergers @2.995 oal. I am only getting 2850fps. I am going to try 66.6, but I am already showing pressure signs and was really hoping for 2950. I didn't want to use R22 because its hot as hell here. Any suggestions?

Do these really have a BC of .735? Sounds unreal! Anyone have luck with these in a 7WSM? and how do they compare to Bergers 180 VLD? http://www.swampworks.com/jlk/JLK%20Bullets.html

I made it out to test some loads with the new 7wsm Surgeon built by GAP. This is going to be one sick stick once load development is done. When I first got the gun from George I tried some of the Corbon loaded 7wsm stuff and some hand rolled stuff with 64 grains of 4831sc with 215M and...

Well this is what it looked like Now thanks to Todd at Manners it looks like this I’ll be working on final load this weekend. I’ll post when I have load all worked out. I want to test RL 17 and some 215M primers this weekend.

It has left my memory what george shoots, 62 or 62.5grs H4831SCC with 180gr VLDS.

Today, started out as a decent day. Around 1:30pm Scott at MCREES PRECISION sent me a PM "look out for a package". So around 6:30PM something from UPS arrived, a nice brown box. I open the box and out come a stock for a M70. I must say, this stock is a bad ass piece of equipment as far as im...

Other then a minor magazine issue that I have already fixed. I am loving it!!! It shoots with minimal load testing. 66gr RL25 180gr Bergers .010 in the lands. Parts list Stiller Tac 30 Short Action Broughton 1:9twist 7.5 contour, finished at 26" Manners T2A stock finished in FDE, 14.5...

Gents, for you 7WSM shooters out there: how long are your tubes holding up?