differences

Can anyone tell me what the differences are between HK's 45C and USP compact (also in .45)?

I was originally under the impression that each new model was superior to all the older ones... but I keep seeing a bunch of people favoring other McMillan models. What are the pros/cons of them all? If it matters... I'm 5'10", have medium sized hands... and plan on mostly shooting at distances...

I tried searching, but my search Foo is very weak, I even slimmed it down to just FN and got nothing even though I know there are some threads. Anyway as far as footprint is there any difference between the two actions? IE I have a PBR and I found a McM that is inlett for the SPR

I have a couple different loads that I shoot out of my 700 PSS. I just confirmed my base zero for my main load (168 SMK over 43.5 grs of Varget, win brass, fed primer) and switched over to a varmit load I just started to work out. I'm using 110gr SVK's, 40 grs varget and the rest is the same...

I loaded up several rounds of RE-15 behind Lapua 155 Scenars, in Lapua brass, in .02 grain increments starting at 44 grains and working up to 46. I loaded the exact same loads using Remington Brass. I had pressure signs with the Lapua brass at 45.2 grains, with a velocity just under 2600 fps...

Aside from the barrel and stock, what are some of the differences between the FN PBR and FN SPR?

I know this goes against the goals of many.....but I am actually looking for a heavy stock....especially in the butt ( ) If going with their heaviest fill and putting an integral adjustable cheekpiece on each......is there much of a difference between a McmIllan A-5 and Manners T4

OK,so what is the general consensus regarding the 7.62mm vs. the .308? Are they the same? Can you shoot the 7.62 from a .308 or vice aversa? Should the two never mix? Just trying to get the "facts"and do the right thing. Thanks

I'm loading for 175 SMK with Varget. My Sierra reloading manual says 41.7 grains is MAX load. My Hogdon reloading manual says 45.0 grains is MAX load. Kindly, WTF?

Can someone tell me what, if any differences there are that would prevent use of DPMS parts in AR-10 and vice versa. I am particularly interested in dimensional differences in pin sizes, thread pitch ect. And can AR-15 parts, such as buffer tubes ect. be used in DPMS and/or AR-10? Thanks Crump...

Very little info on Black Hills web site on differences... search has not been very helpful. Background... Myself and two buddies are getting new .223 Rem rifles and want to have some ammo when they get here and were wondering which all around load to try out first. Rifles are 16" and 20" 1:8...

I've been wondering if reticle illumination really cost the price difference, or there is more to it. IOR Valdada 2.5-10x42 Hunting Rifle Scope 4A Reticle $645.00 IOR Valdada 2.5-10x42 Rifle Scope Illuminated 4A Dot $975.00

Is there any quick and easy way to determine POI effects by what the pressure is? If I look at my Suunto today and it tells me 28.30hg is there any way to determine what my dope will be tomorrow when it reads 27.30hg? Obviously nothing beats gathering actual dope in all conditions but just...

Can you tell me what the difference is between Nosler, Winchester, Norma, Lapua, Hornady, Federal and Remington Brass? I found lots of "this is better than that" stuff but no specifics. Which is softer, which is smaller inside kind of info. Also which ones are similar? Or if there is a link to...

For those with a good bit of experience behind both, do you change anything when shooting the gas guns? I would consider myself an "experienced" shooter with my bolt gun at this point. I've been shooting AR15/M16 style rifles for almost 20 years now but very little of that was spent working on...

I only recently looked through my first USO. I was impressed and believe there is an appreciable difference between it and my $1100 MKIV (which I dearly love, and believe is in excellent optic for the money). I have not looked through an S&B. My question pertains to the differences between USO...