Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Hey everyone, I read through many pages and searched as well but apologies if I missed a thread on this topic. I'm curious what those of you who have a 4-16 atacr on an AI AT (low scope rail and no NV) and/or an AR10 with a continuous rail are using for ring/mount height. I'm looking to get...
Other than what's required to keep the objective clear of the rail, are there any other considerations I should be aware of when determining the proper ring height for a DPMS LR-308 with a flat top & A2 stock?
I am mounting a Falcon 4-14 FFP (30mm tube and 44mm objective) on a CZ 452 American 16 with a HotRod9mm base. I would like to use Seekins rings. Does anyone know the correct ring height for this application? Thanks
I have a EGW 20 MOA base on my SPS. The rear height of the base is .530 and its too tall for me to get the proper cheek weld. Are the better bases (NF, Badger, seekins) lower at the rear? I read where the seekins is .44 in the rear fro the 20MOA mount, which will help, but I wanted to find the...
The new 10/22 trainer is almost finished. I have a sported thumb hole stock coming from Clark Custom Guns and plan to mount a Falcon 4-16FFP Scope on top of a Volquartsen Picatinny rail. Stock: http://www.clarkcustomguns.com/images/stocks/tundrabone.jpg Scope Base...
1) Who makes a 20MOA 1-piece rail for a Howa 1500/WBY Vanguard besides Roedale precision? 2) I have Leupold low PRW rings holding my scope onto a Roedale rail on my Sako 75 at the moment, the scope sits irritatingly high. What's another quality option for lower 1" rings than the low PRWs, but...
Guys, I just ordered the new Falcon 5-25x50 and I'm wondering what height I need. I have a 20moa tps base and I'm wanting to get the burris xtreme rings. Any help would be appreciated. Thanks
Can anyone tell me what the ring height is from the base to the center of the ring. I have an Aimpoint carry handle mount for a 9mm ar15 that I want to possibly co-witness with the Strikefire.
I will be mounting a Leupold VX-III 4.5x14x50 on a Remington 700 5R. I will be using a EGW base and Burris Xtreme Tactical rings. I do not want to use rings higher than necessary. What height should I use?
As the title mentions... I have a 20 moa base. 3.8-22 USO ergo obj. and butlers. need info on the lowest possible ring height without interference on the butlers. Badgers preferable. Not married to em though. TIA
I have American Precision Arms doing a .308 Build on a Surgeon Action. I'm going to use a Nightforce 5.5-22x50 or 5.5-22x56. I have not purchased the scope yet. What is the correct Ultralite ring height. 1.125" ? My other rifle is a Remington action with Badger base and Leupold MK4 rings.
Hello, I have the new falcon with the 50mm objective on order, I will be using a EGW 20 MOA base and TPS rings. What height of TPS rings should I use? BTW:The scope will be mounted on a Tikka T3 Hunter Stainless in 223. Thanks!
probably a topic thats been covered a bunch but im in a pinch and need a quick response. uso sn3 3-17x44 objective stiller 20 moa rail mtu contour barrel... What ring height should i go with? Medium or low? Will low even work? Looking at a set of Burris tac rings. Away from home and away from...
What rings are you guys running. I have a set of mediums on the way, may be too low. Its a NF with a 56mm obj., and a 20 MOA base, medium palma countour... Was told that Medium highs may not even be enough...
I want to put a 50mm Nightforce scope on a Badger 20moa base Rifle has a heavy bbl about 1" at the muzzle. Remington long action. What height ring do I need to get the scope to clear the bbl? Also what rings do you reccomend. Coach
Was about to order some Badger rings for my 308 with a badger 20moa base and was just curious if anyone knew what height to go with. My scope is a NF 5-22-56. I believe I'm going to have to go with the USMC DMR with a height of 1.031? I figure someone on here has done this setup before and knows...
i have a remington 700 sps tactical. going to be putting on a mark4 6.5x20x50. i am going to use a 20 moa base. leupold says to use high rings. im wanting to use the lowest possible. has anybody with my setup used the mediums. thanks everyone.
Thinking of getting a Millet 4-16X50 for a Remingtion 700 5R. What height rings do I use as the bell on this must be pretty big. Low or medium. Thinking of going TPS route on rings and base.
Good morning, I picked up my 700P yesterday and upon recommendation, ordered the Near base. The bolt went out to Hoopers to have the Badger knob and handle tapped. I have the Eagle stock pack and the Harris. SHould be getting the receiver 8x40'ed when I get the base next week. I've decided on...
Just recently put my scope on my rifle and think I may have gone with the wrong height rings. I went with Badger Ordnance low rings once I get behind the rifle laid out prone I have to dig in with my cheek a little to get a good clear site picture. How much of a problem is this gonna be? I know...