speed

Competition Electronics Pro Chrono DLX like new in box. Used one time while waiting on my lab radar. $125 shipped to lower 48 accept PP FF, PP GS+3%, zelle. Introducing the ProChrono DLX ballistic chronograph with improved accuracy specs and built-in Bluetooth Built in full featured operating...

Called to request a Form 1 aplication packet at the beginning of March and it finaly showed up today. I hope they're a bit more expedient when I send it back to them. Just need to decide which one I'm going to do, 22 cal or 30 cal. If 22 it will be doing double duty on a 22-250 and possibly a...

just finished uniforming 500 308 primer pockets, what a ball ache. i see for trimming the guaird trimmer is the best , is they something of simmilar quality for primer pocket work? or better still does anyone make a complete auto machine for case prep , like a dillon 1050 type of thing? any ideas?

Hello guys, I have a question about lathe speed for reaming. I just got my 6.5x47 reamer from PTG for my new build. The last barrel I did I ran at 45 rpm and was told that might be a little slow. I'am just not sure. What speed do you guys run? The barrel I am doing is a S/S Krieger. Thanks for...

Gents, First of all, specs of the rifle in question... .243 Win 27" 1-8" twist Krieger SS Now on to the meat and potatoes of what I'm here to ask y'all. I got to run my loads over a chrono today. The following results are all new Lapua brass, CCI BR2's, 107gr SMK (moly), H4350, and computed...

What speeds are doing you best for the 208? Im having a hard time getting the vertical dispersion under MOA durring re-work up. Horizontal is in the 1/4-1/3 MOA but vertical is being stubborn. Ive covered 2750 - 2850 FPS with 74 and 75 gr charges of H1000 which is where my old load was...with...

Has anyone done an Altitude Speed of Sound Chart? To make a long story short, I live at approximately 4000 ft. above sea level. I found a balistics chart and ran some numbers for the 40 grain .22LR at 1085 fps... (Not sure I did everything right with the chart), anyway, the results say that...

I got my 7wsm up and going. I chronoed my load of 66 grains of H1000, with 180 bergers @2.995 oal. I am only getting 2850fps. I am going to try 66.6, but I am already showing pressure signs and was really hoping for 2950. I didn't want to use R22 because its hot as hell here. Any suggestions?

Hey guys I'm wanting to try some 155 scenars out of my 5-r .308 because I heard you could get 3100fps out of them and still have a pretty good b.c. Is this true? How fast have y'all got them up to with an accurate load? I have a 24" barrel.

Just wanted to know thoughts on it. My delema is I have a 300wm that I shoot 210vld's at 2700fps and it will shoot a little over 1" @ 300yds, and at 100yds it shoots better then I could get you all to belive, you probably would toss the B/S flag anyway I have reloaded a lot of diffrent stuff...

<span style="font-weight: bold">Want to make your ,308 Ammo loading tons faster?.</span> <span style="font-weight: bold">Pick up a Lyman "M" Die, and a Redding crimp Die, to close case mouth neck expansion after seating,just set the crimp die deep enough to straighten the flare( DO NOT CRIMP...