Gunsmithing 10rd mags 300 prc

[Lindley Machine]

View attachment 7258327.

I built a 300prc, I milled out the magwell and the feed ramp for Lapua length mags, I bought the customer a 5rd mag and he wants an additional 10rd. Does anyone know if they make a 10rd 300wm CIP, or I can us a Lapua mag and bend the lips.

 

[OutsideSeth]

As far as I have been able to tell they are only available in the 5rd capacity. From what I have read the 338 CIP magazine should be able to be used with bent lips for proper feeding. I have seen reference to that in multiple places, but haven't taken the plunge to confirm myself.

 

[Lindley Machine]

As far as I have been able to tell they are only available in the 5rd capacity. From what I have read the 338 CIP magazine should be able to be used with bent lips for proper feeding. I have seen reference to that in multiple places, but haven't taken the plunge to confirm myself.

That is what I did and it works well, but I couldn't even find a 338 10 Rd mag.

 

[high right]

I run the 338 cip mags in mine.

 

[2aBaC̶a̶]

Also looking for 10rd CIP mags. Let us know if you find any.

all the 10rd 338 mags that I found are AW(double stack) type.