• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

1945 BSA No4 Mk1 "T" sniper with Transit Chest

Miller Tyme

Private
Minuteman
Aug 31, 2020
93
457
Picked this one up from a buddy late last year and being I already have a shooter "T" this one will remain a safe queen in the man cave. It's 1945 BSA produced No4 Mk1 Enfield converted to a "T" sniper by Holland & Holland. The rifle is all numbers matching with a honest mismatched scope mount with the correct model No32 MkIII (1945) scope, possible done during Arsenal repairs. What really sets this one off is the original matching Transit Chest that came with it, something that is quite hard to find.
 

Attachments

  • 28 (2).png
    28 (2).png
    517.3 KB · Views: 418
  • 29 (2).png
    29 (2).png
    564.9 KB · Views: 277
  • 30 (2).png
    30 (2).png
    642.9 KB · Views: 209
  • 19 (2).png
    19 (2).png
    643.7 KB · Views: 267
  • 20 (2).png
    20 (2).png
    619.4 KB · Views: 280
  • 21 (2).png
    21 (2).png
    684.2 KB · Views: 210
  • 22 (2).png
    22 (2).png
    820.8 KB · Views: 287
  • 23 (2).png
    23 (2).png
    958 KB · Views: 325
  • 24 (2).png
    24 (2).png
    516.3 KB · Views: 246
  • 25 (2).png
    25 (2).png
    758.9 KB · Views: 179
  • 26 (2).png
    26 (2).png
    754.2 KB · Views: 186
  • 27 (2).png
    27 (2).png
    965.7 KB · Views: 208
  • 27.5(2).jpg
    27.5(2).jpg
    384.4 KB · Views: 202
  • 14 (2).png
    14 (2).png
    642.5 KB · Views: 177
  • 17 (2).png
    17 (2).png
    467.1 KB · Views: 194
  • 13 (2).png
    13 (2).png
    982.6 KB · Views: 180
  • 10 (2).png
    10 (2).png
    829.9 KB · Views: 168
  • 9 (2).png
    9 (2).png
    1.3 MB · Views: 187
  • 8 (2).png
    8 (2).png
    460.6 KB · Views: 184
  • 1 (2).png
    1 (2).png
    499.9 KB · Views: 213
  • 5 (2).png
    5 (2).png
    1.3 MB · Views: 226
Last edited:
That is a beautiful T!

It is my understanding that the TR was stamped at the time of conversion (telescoped rifle). If you don't already have a copy, I strongly recommend this book by Peter Laidler:

An Armourer's Perspective: .303 No. 4 (T) Sniper Rifle and the Holland and Holland Connection.


longebow
 
Picked this one up from a buddy late last year and being I already have a shooter "T" this one will remain a safe queen in the man cave. It's 1945 BSA produced No4 Mk1 Enfield converted to a "T" sniper by Holland & Holland. The rifle is all numbers matching with a honest mismatched scope mount with the correct model No32 MkIII (1945) scope, possible done during Arsenal repairs. What really sets this one off is the original matching Transit Chest that came with it, something that is quite hard to find.
That is an iconic sniper rifle.😍
Congratulations, hope you enjoy it.
My first real rifle was a Lee Enfield.
 
  • Like
Reactions: Miller Tyme
That is a beautiful T!

It is my understanding that the TR was stamped at the time of conversion (telescoped rifle). If you don't already have a copy, I strongly recommend this book by Peter Laidler:

An Armourer's Perspective: .303 No. 4 (T) Sniper Rifle and the Holland and Holland Connection.


longebow
The "T" on the action side wall after the No.4 Mk.1 designation was stamped at the time of conversion to indicate the rifles new designation of telescopically sighted, not the "TR".
The "TR" wouldve been stamped at the factory(BSA Shirley) during accuracy testing to indicate the rifle exceeded the standard accuracy requirements and had been selected for sniper conversion at Holland & Holland. Once at H&H it wouldve been subjected to more stringent accuracy testing and if it passed it went on to the conversion process. If it failed it was returned to stores to be issued as a standard infantry rifle. They are rare, but there are known examples of standard infantry rifles that bear the "TR" on the butt socket that were never converted.
The "S51" on the underside of the butt stock is the wartime code for H&H.
The last stamp to be applied before it left H&H was the " crown over D6E"Enfield final inspectors stamp on the rear of the action body to the left of the cocking piece.
FWIW, if the scope had been replaced in service it would have been collimated to the rifle and the old number on the bracket and wrist would have been barred out and the new rifle/scope numbers stamped.
Rifle and matching scope likely got separated by the importer.
Nice rig, nonetheless.
 
I've got a No.4 Mk1 T myself, and it too is mismatched.

My rifle is a 1945 model, but the scope is a No.32 Mk1 from Kodak LTD in 1941. It is in a Dalglish (sp...I'm not looking that one up at the moment) mount with a 1943 serial number.

Great example you have there to put up in the man cave!
 
Thanks everyone, this is my shooter, it is a 1941 Fazakerly No4Mk1"T"

I have been told that it is a legit No4 Mk1 (T) that was produced in early in the production run either by Enfield or H&H before the markings' system to become standardized. The rifle went through a arsenal repair indicated by the "FTR /Factory through Repairs" stamp on the butt socket ring and the new Canadian Long Branch barrel dated 44/45. The scope mount is a Rose Brothers and was stamped matching to the rifle during the FTR , (old S/N being AP3754) and is stamped with a "GF /Gujarat Forces-India State forces" indicating the rifle was at some point used in India at some point after the FTR. The scope is the latter model No 32 Mk3 and the front scope pads are properly staked to the receiver. The stock has no markings to denote either Enfield or H&H conversion and has been refinished with an Oil finish which may have been done during its days in India. The rifle has the "BNP" mark (indicating the it was proofed in UK) and "ENGLAND" mark suggesting very strongly that it was so marked for sale as surplus to America pre 1968.

Being as the rifle has been heavily refurbished it's value as an early example of an Enfield "T" is diminished, but that doesn't stop it from being fantastic joy to shoot.
 

Attachments

  • 100_4936 (2).JPG
    100_4936 (2).JPG
    335.8 KB · Views: 100
  • 100_4938 (2).JPG
    100_4938 (2).JPG
    718.6 KB · Views: 71
  • 100_4943 (2).JPG
    100_4943 (2).JPG
    581.8 KB · Views: 140
  • 100_4946 (2).JPG
    100_4946 (2).JPG
    558.1 KB · Views: 107
  • 100_4947 (2).JPG
    100_4947 (2).JPG
    474.9 KB · Views: 93
  • 100_4955 (2).JPG
    100_4955 (2).JPG
    620.9 KB · Views: 101
  • 100_4958 (2).JPG
    100_4958 (2).JPG
    517.1 KB · Views: 97
  • 100_4962 (2).JPG
    100_4962 (2).JPG
    522.1 KB · Views: 77
I've got a No.4 Mk1 T myself, and it too is mismatched.

My rifle is a 1945 model, but the scope is a No.32 Mk1 from Kodak LTD in 1941. It is in a Dalglish (sp...I'm not looking that one up at the moment) mount with a 1943 serial number.

Great example you have there to put up in the man cave!
Just joined and come across this post! Hope you don’t mind me commenting. I myself have a 1945 T with a mk1 KL 1941 scope. Mine all matches though. Scope mount matches the rifle number and the scope number is on the collar. Maybe they ran out of mk3 scopes at the time of building and they had mk1s left? It’s a mystery to me!
 
Just joined and come across this post! Hope you don’t mind me commenting. I myself have a 1945 T with a mk1 KL 1941 scope. Mine all matches though. Scope mount matches the rifle number and the scope number is on the collar. Maybe they ran out of mk3 scopes at the time of building and they had mk1s left? It’s a mystery to me!

Maybe. In early 1945 I'm sure things were pretty tight, but I've never heard of this happening (1941 optic on a 1945 T) until you mentioned it. Mine still has a different rifle's serial number on the mount, and that number put that rifle being made somewhere in 1943. In my case I'm sure that when everything got mothballed into storage before being pulled a decade later and sold to Americans...that they just slapped a scope on a rifle and shipped it out. The rifles and optics were kept separate in storage.

There are probably still a couple pretty knowledgeable folks who whote a book or two on the T over at the Milsurp forums. They might be able to help give a definitive answer to your question. https://www.milsurps.com/forumdisplay.php?f=72&s=75a52a6a8a9a9025664885d7948c986f
 
  • Like
Reactions: Miller Tyme