.224 and 6mm Grendel ***sold***

[K_4c]

I'm getting out of the Grendel variants.

I've got 406 sized, 59 primed, 72 unsized (fired, primers just not popped out)pieces of brass, and roughly 50 loaded. Majority of brass is serviceable and still holding primers. All brass is sized for .224 and is Hornady type.

22 Grendel (1:8 ) and 6mm Grendel barrels. 224 barrel has under 700 rds on it. 6mm Grendel has under 300. Both are SPR contour with gas blocks at .750”.

I was shooting the 75 eld’s at 2980 fps.

6mm Grendel was miss aligned when pinning the gas block on?‍ It’s a Mcgowen SS).

$320 for it all.

 

[K_4c]

Up

 

[TonyTheTiger]

Barrel lengths?

 

[K_4c]

Pic for reference...

Mcgowen and Wilson are the barrel manufacturers. Both threaded 5/8x24.

 

[K_4c]

Up. Cheap way to get into some new calibers.

 

[K_4c]

$300 shipped for it all.

 

[K_4c]

I can add a forester micro seater and Redding Type s bushing die to the mix for another $75.

You’ll just need the applicable bushings.

Also throw in a gas tube for the .224

 

[K_4c]

Up with what I believe to be my 48 hour bump.