Hey guys, i have attached the load data from hogdon for a .224 valkyrie setup im building and i wanted some input on what you guys found for nodes with these powders/bullets, and where you think i should start. I plan to load them to max mag length
The Gun:
AR15 platform
20" RA ultramatch 1/7.5
.800 adjustable gas block
The Bullets (all i can find):
75g ELD-M
77g SMK
60g Vmax (for night hunting, this may need to be temp stable)
The powders:
IMR4895 ( have the most of this)
CFE-223 (share with my 6ARC)
Varget (share with my .223)
Primer:
CCI BR4
CASE:
once fired Federal cases annealed
attached is the factory data. what do you think? Thanks
The Gun:
AR15 platform
20" RA ultramatch 1/7.5
.800 adjustable gas block
The Bullets (all i can find):
75g ELD-M
77g SMK
60g Vmax (for night hunting, this may need to be temp stable)
The powders:
IMR4895 ( have the most of this)
CFE-223 (share with my 6ARC)
Varget (share with my .223)
Primer:
CCI BR4
CASE:
once fired Federal cases annealed
attached is the factory data. what do you think? Thanks
