Gunsmithing 22lr Gunsmith Needed CZ452

[TheBeard413]

Looking for a really good 22lr smith for my cz452 lh build. All the pieces are on order. Lilja barrel is 7 to 8 weeks out. Input and recommendations welcome.

 

[TresMon]

PM sent

 

[padom]

Did you get a Lilja barrel blank that needs chambered and fitted to your action? Or their ready to install barrel??

 

[TheBeard413]

Did you get a Lilja barrel blank that needs chambered and fitted to your action? Or their ready to install barrel??

It needs to be cut, threaded to the receiver, also threaded for a muzzle device, then lastly bedded in my stock

 

[padom]

CZ452 doesnt have action threads. Are you threading the action and the barrel?

 

[TheBeard413]

CZ452 doesnt have action threads. Are you threading the action and the barrel?

I bought a Lilja .900 straight taper blank. I believe the length is 27”. Needs a chamber cut and how ever it’s attached needs to be done, plus thread for a muzzle device. Then bedded in my stock

 

[702lineman]

CZ452 doesnt have action threads. Are you threading the action and the barrel?

I'm pretty sure a 452 has tenon threads. The 455 does not

 

[padom]

Correct so the tenon has to be cut, chambered, headspaced, to be installed on the cz action. Who's doing this for you?

 

[padom]

I'm pretty sure a 452 has tenon threads. The 455 does not

Really? Didnt know that..thought it was same as 455. Interesting

 

[TheBeard413]

Correct so the tenon has to be cut, chambered, headspaced, to be installed on the cz action. Who's doing this for you?

I am looking for someone to do it for me? I don’t have this skill set to do it myself

 

[702lineman]

It is metric threads so about any gunsmith that can cut metric threads can do it for you.

 

[TheBeard413]

Well if you guys could recommend a reputable smith, that would be awesome

 

[TresMon]

Well if you guys could recommend a reputable smith, that would be awesome

Hey! Over here. (Waving at & pecking on screen) I sent a PM.