• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Firearms 260 Rem Tikka T3 CTR Barreled Action w/Brass and Dies - Now Splitting

Macht

Supporter
Supporter
Full Member
Minuteman
Jan 27, 2014
294
159
WY
Looking to sell my PRS rifle and associated equipment. Gun has been used but not abused. Have some random R-P brass I'd also throw in if you want it. Open to all splits at this point.

$1,150 shipped to the lower 48 for everything left. Paypal, Venmo, USPS money order, or personal check accepted. FFL must accept from individual.

Splits:
  • Barreled action: $1000 shipped
  • Action only: $500 shipped SPF
  • Barrel only: $550 shipped
  • Dies+Brass: $125 shipped
  • Chassis: $500 shipped SOLD
Barreled Action Specs:
  • Action: Tikka T3 CTR w/Anarchy Outdoors trigger spring, no recoil lug, no action screws SPF
  • Barrel: 24" PVA barrel in .260 Rem, MTU contour, 1/7.5 twist, 275 rounds fired
  • Muzzle Brake: Rearden PRS w/hub compatible threads
  • Chassis: KRG Whiskey-3 Gen 5 w/spigot, flat bag rider, and slim buttpad SOLD
Additional Items:
  • Glades Armory bolt knob
  • RCBS full length die set and shell holder
  • 250X pieces of Lapua brass, prepped to load (not pictured)
  • 1X 5-round AICS mag (not pictured)
  • KRG extended action screw bit
  • Tikka action wrench
  • Original KRG short bag rider
  • Original KRG buttpad
 

Attachments

  • IMG_1265.jpg
    IMG_1265.jpg
    260.9 KB · Views: 379
  • IMG_1266.jpg
    IMG_1266.jpg
    531.4 KB · Views: 377
  • IMG_1267.jpg
    IMG_1267.jpg
    396 KB · Views: 312
  • IMG_1285.jpg
    IMG_1285.jpg
    445 KB · Views: 169
  • IMG_1286.jpg
    IMG_1286.jpg
    329 KB · Views: 168
  • IMG_1287.jpg
    IMG_1287.jpg
    516.3 KB · Views: 243
Last edited:
Is there anything wrong with the action? I can see you changed the barrel and are including the action wrench. I know the Tikka's can be very difficult to get off. Thanks
 
I'll add some more pictures tonight, the finish is slightly worn in one spot. Other than that, nothing wrong at all.

The factory barrel was a pain to get off, I ended up cutting a relief in the old barrel to make it easier.
 
  • Like
Reactions: simplereloader
Chassis SPF, barreled action still available.
 
Buyer backed out, action still available.