• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Gunsmithing 260AI reamer, norma/nosler

Bugholes

Sergeant
Commercial Supporter
Full Member
Minuteman
May 26, 2008
678
635
Central TN
www.bugholes.com
can anyony supply some neck thickness measurements for norma and/or nosler brass in 260 rem. I am ordering a reamer for a 260AI build and only have dimensions from r-p brass.

Thanks...
 
Re: 260AI reamer, norma/nosler

On my Nosler brass it varies from .012 -.014 on a single case, so it needs to be neck turned if you want a uniform neck wall thickness.
 
Re: 260AI reamer, norma/nosler

Hello!
I have new unfired Normabrass in .260R (Norma made Nosler´s brass too!), if i take 10pcs I got this middle value:
Neck outside: 0.2862"
Neck inside: 0.2592"
Neckwall thickness: 0.0135"
I hope this will help you a little...
Best Regards
TOMMY // SWEDEN