• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

SOLD 300 PRC Misc Gear

uncle_smokey

I Like Midgets
Supporter
Full Member
Minuteman
  • Feb 9, 2018
    303
    229
    The Beach
    Divorced and downsizing, plus I’m way too heavy on 30 cal magnums. Up for grabs is a 28” AXMC barrel chambered and threaded by Hawk Hill using one of their blanks. It is a 9 twist with the larger tenon for the AXMC. It’s threaded 5/8x24, has a protector cap, comes with an APA Gen 2 little bastard and is cerakoted in graphite black.

    Round count is exactly 200 rounds. However, I babied the shit out of it. First 150 rounds were break in, and not even close to normal power loads. Last 50 rounds were normally powered, but not even close to hot. Found a promising load sending a Berger 220 at 2950 using N565. Barrel has plenty of life left in it. Also included is 149 pieces of ADG brass 50 2x and 99 1x. They have all been cleaned, annealed, sized and trimmed. I will include my notes if you’d like. Barrel and brass is $800 TYD. If buyer only wants the barrel, we can likely work something out but I would prefer to sell as a set since all the fire forming is done. If the buyer wants extras, I have the following we can negotiate price on:
    Redding F/L sizing die set with 200 rounds on it, Giraud case holder and AMP pilot. If buyer doesn’t want extras I’ll sell that stuff separately. Since rules are rules, $1,000 gets you everything you need to shoot 300 PRC in an AI.

    Pics to follow this afternoon. PayPal ff preferred, and no trades desired. Thanks.
     
    Pics up. I’ll be damned - the rifle scratched the barrel when I was removing it. RRS rail screw was too far in. Anyways, that’s on me so take 50 off for my mistake. Let me know if you have any questions.
     

    Attachments

    • C6EC011F-A365-4AB7-965B-6A55147C6A54.jpeg
      C6EC011F-A365-4AB7-965B-6A55147C6A54.jpeg
      453.9 KB · Views: 69
    • 95B9987E-11E8-4C30-B3F8-8B9178C4CFD1.jpeg
      95B9987E-11E8-4C30-B3F8-8B9178C4CFD1.jpeg
      497.4 KB · Views: 66
    • 2ED92C87-7AD2-41EF-9600-BD01EB691A95.jpeg
      2ED92C87-7AD2-41EF-9600-BD01EB691A95.jpeg
      740.3 KB · Views: 58
    • 40544D98-F09E-464A-BA83-3990A69D1058.jpeg
      40544D98-F09E-464A-BA83-3990A69D1058.jpeg
      560.7 KB · Views: 59
    • AAE15E56-694F-43D2-9A18-6A4205BFBF58.jpeg
      AAE15E56-694F-43D2-9A18-6A4205BFBF58.jpeg
      336.1 KB · Views: 68
    • 89D66BCC-3DEC-4AAB-BD47-3E83D012F17C.jpeg
      89D66BCC-3DEC-4AAB-BD47-3E83D012F17C.jpeg
      613.9 KB · Views: 72
    • 66AECF4F-89BF-4728-8D0D-05CBADA33296.jpeg
      66AECF4F-89BF-4728-8D0D-05CBADA33296.jpeg
      538.1 KB · Views: 73
    • 95F575C4-527B-47BA-ACD6-51E486184BF4.jpeg
      95F575C4-527B-47BA-ACD6-51E486184BF4.jpeg
      686 KB · Views: 76
    Bump it up. This stuff has to go. New prices:
    Barrel, brake and brass - $700 shipped
    Dies - $200 shipped
    Giraud case holder- $30 shipped
    AMP pilot - $30 shipped
     
    Most everything is gone, but I still have the dies for sale. Let’s get them gone. $150 TYD
     

    Attachments

    • F2077D7D-4C9B-4E83-BBD3-98ADF1189A6D.jpeg
      F2077D7D-4C9B-4E83-BBD3-98ADF1189A6D.jpeg
      471.1 KB · Views: 28
    • A203B276-09DE-48EA-A5B8-CEA65FD45798.jpeg
      A203B276-09DE-48EA-A5B8-CEA65FD45798.jpeg
      330.6 KB · Views: 26