Looking for a .300 Win Mag chamber reamer for 220 gr. SMK at AICS mag length. Any suggestions?
Re: 300 Win Mag chamber reamer
PT&G will make a reamer to your specs.
PT&G will make a reamer to your specs.
Re: 300 Win Mag chamber reamer
load up a dummy round (no primer/powder) with the brass, bullet and seating depth you want to use and send it to ptg. let them know or ask for their advice on how much jump you want. they will grind the reamer special for you.
load up a dummy round (no primer/powder) with the brass, bullet and seating depth you want to use and send it to ptg. let them know or ask for their advice on how much jump you want. they will grind the reamer special for you.
Re: 300 Win Mag chamber reamer
Thanks! I was about to send the barrel and action to my smith and really wanted a chamber tailored to the load I plan to shoot. I'll pick up a set of dies today and load something up.
Thanks! I was about to send the barrel and action to my smith and really wanted a chamber tailored to the load I plan to shoot. I'll pick up a set of dies today and load something up.
Re: 300 Win Mag chamber reamer
You can use a standard 300 WM reamer then throat it for your bullet. There was a guy on Mauser Central that had a 300 WM reamer and go /no-go gauges for $70. I bought the 308 gauges from him.
http://www.mausercentral.com/forum/viewtopic.php?t=28152
You can use a standard 300 WM reamer then throat it for your bullet. There was a guy on Mauser Central that had a 300 WM reamer and go /no-go gauges for $70. I bought the 308 gauges from him.
http://www.mausercentral.com/forum/viewtopic.php?t=28152
Similar threads
Gunsmithing Any smiths with a 20BRA reamer?
