Does anyone have any load data for .300 WSM 180gr bullet and H1000 or IMR 4064?
- Thread starter partisan1911
- Start date
Re: 300 WSM
I have only one 180 gr load worked up for my 300WSM
1. 180gr Nosler Accubond
2. 64grs IMR 4350
3. MV 2960 from O P35 chrony
4. Barrel 26 Hart
5. Groups run in the 5/8 to 1/2 at 100
I have only one 180 gr load worked up for my 300WSM
1. 180gr Nosler Accubond
2. 64grs IMR 4350
3. MV 2960 from O P35 chrony
4. Barrel 26 Hart
5. Groups run in the 5/8 to 1/2 at 100
Re: 300 WSM
I am trying to consolidate the powders i use a little bit. I use H1000 for my Lapua and IMR 4064 for my .308. I am not sure if either of those powders burn rate will work in my short mag.
I am trying to consolidate the powders i use a little bit. I use H1000 for my Lapua and IMR 4064 for my .308. I am not sure if either of those powders burn rate will work in my short mag.
Re: 300 WSM
partisan,
If you don't have any luck with the Hodgdon or IMR powders, try RE-22.
66.8 gr.
Win brass
WLRM
180 gr Nosler BT
2935 fps @ 70 degrees
800 ft ASL
This is a hunting load.
Regards,
Bill
partisan,
If you don't have any luck with the Hodgdon or IMR powders, try RE-22.
66.8 gr.
Win brass
WLRM
180 gr Nosler BT
2935 fps @ 70 degrees
800 ft ASL
This is a hunting load.
Regards,
Bill
Re: 300 WSM
Likewise, nothing on those powders. But, just working up hunting loads myself so perhaps what I have so far will be helpful:
H-S Precision 2000 SPL
Win brass
Fed 215
Nosler Accubond 180
RL22 67gr - 2855fps
RL22 68gr - 2899
RL22 69gr - 2936
RL17 66gr - 3115fps (this was most accurate load so far 3/4@100)
RL17 67gr - 3149
Back to the range today with more loads . . .
Cheers
Likewise, nothing on those powders. But, just working up hunting loads myself so perhaps what I have so far will be helpful:
H-S Precision 2000 SPL
Win brass
Fed 215
Nosler Accubond 180
RL22 67gr - 2855fps
RL22 68gr - 2899
RL22 69gr - 2936
RL17 66gr - 3115fps (this was most accurate load so far 3/4@100)
RL17 67gr - 3149
Back to the range today with more loads . . .
Cheers
