.308 black hills match brass

[7.62willdo]

Is it true this is just winchester brass?

 

[gunsnjeeps]

Re: .308 black hills match brass

I don't know if it's "just Winchester" brass. I'd bet Winchester makes it though, but I don't know what line it is. The Black Hills match .223 is made by Winchester and shoots great for 77's.

 

[mikeyz250]

Re: .308 black hills match brass

Yes it is made by Winchester

 

[ReaperDriver]

Re: .308 black hills match brass

Is BHA and Win brass considered interchangable as far as reloads go? Is it just the same brass with a different headstamp on it? Or dimensionally different on the inside?

 

[six 4 sure]

Re: .308 black hills match brass

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ReaperDriver</div><div class="ubbcode-body">Is BHA and Win brass considered interchangable as far as reloads go? Is it just the same brass with a different headstamp on it? Or dimensionally different on the inside? </div></div>

I would guess it's the same, but don't know that for a fact. Personally, I never mix headstamps for any reloading.

 

[Grand]

Re: .308 black hills match brass

I use WW and BHA interchangeably on my .308. BH Match brass tends to be more uniform.

 

[427Cobra]

Re: .308 black hills match brass

I don't know if Win makes there brass, but my load data is the same for both

 

[rcw3]

Re: .308 black hills match brass

The only thing I would say is that the Black Hills brass (at least what I have) loads about about .002" smaller in diameter in the neck than Winchester I have. Plus if you use fired Black Hills ammo for your supply of brass, the primer pockets are crimped in with a minor crimp.

The Black Hills factory ammo is excellent stuff!

Robert Whitley

 

[gunsnjeeps]

Re: .308 black hills match brass

In .223 (5.56) it is the same. I shoot the same load and group with it.