Rifle Scopes 30mm quick detach rings
- Thread starter 42769vette
- Start date
Re: 30mm quick detach rings
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 427Cobra</div><div class="ubbcode-body">LaRue is the standard by which all others are judged by. </div></div>
Until you use a Bobro.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 427Cobra</div><div class="ubbcode-body">LaRue is the standard by which all others are judged by. </div></div>
Until you use a Bobro.
Re: 30mm quick detach rings
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 427Cobra</div><div class="ubbcode-body">LaRue is the standard by which all others are judged by. </div></div>
Yes, and after using LaRue, I have no more "quick'detach" scope rings. Accuracy, precision, and repeatability are more important to me. A 7/16" wrench allows me to "quickly" detach my rings AND the rings are not the weak link causing accuracy problems. I'd suggest NF Unimounts instead.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 427Cobra</div><div class="ubbcode-body">LaRue is the standard by which all others are judged by. </div></div>
Yes, and after using LaRue, I have no more "quick'detach" scope rings. Accuracy, precision, and repeatability are more important to me. A 7/16" wrench allows me to "quickly" detach my rings AND the rings are not the weak link causing accuracy problems. I'd suggest NF Unimounts instead.
Re: 30mm quick detach rings
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Scooter-PIE</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 427Cobra</div><div class="ubbcode-body">LaRue is the standard by which all others are judged by. </div></div>
Yes, and after using LaRue, I have no more "quick'detach" scope rings. Accuracy, precision, and repeatability are more important to me. A 7/16" wrench allows me to "quickly" detach my rings AND the rings are not the weak link causing accuracy problems. I'd suggest NF Unimounts instead. </div></div>You have personally had issues with the Larue mount? Could you please go into more detail with the problems you have had?
Thanks,
-Bob
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Scooter-PIE</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 427Cobra</div><div class="ubbcode-body">LaRue is the standard by which all others are judged by. </div></div>
Yes, and after using LaRue, I have no more "quick'detach" scope rings. Accuracy, precision, and repeatability are more important to me. A 7/16" wrench allows me to "quickly" detach my rings AND the rings are not the weak link causing accuracy problems. I'd suggest NF Unimounts instead. </div></div>You have personally had issues with the Larue mount? Could you please go into more detail with the problems you have had?
Thanks,
-Bob
Re: 30mm quick detach rings
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bm11</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Scooter-PIE</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 427Cobra</div><div class="ubbcode-body">LaRue is the standard by which all others are judged by. </div></div>
Yes, and after using LaRue, I have no more "quick'detach" scope rings. Accuracy, precision, and repeatability are more important to me. A 7/16" wrench allows me to "quickly" detach my rings AND the rings are not the weak link causing accuracy problems. I'd suggest NF Unimounts instead. </div></div>You have personally had issues with the Larue mount? Could you please go into more detail with the problems you have had?
Thanks,
-Bob </div></div>
Sure, I would not say anything unless I had personal experience. LT-104: would not hold a zero. After much troubleshooting and switching rifles and NF scopes, I was absolutely positive the mount was the problem. For example, shot a 450/600 in F-class match with this mount and then shot a 570/600 with the same rifle/scope and a NF unimount the next week. I fiddled with tightening the scope rings properly, increase the tension on the quick release lever. It did not help. I think the way the rings mount to the base is the problem: too much opportunity for things to move around. Anyway, with the NF Unimount, the AR now shoots lights out.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bm11</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Scooter-PIE</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 427Cobra</div><div class="ubbcode-body">LaRue is the standard by which all others are judged by. </div></div>
Yes, and after using LaRue, I have no more "quick'detach" scope rings. Accuracy, precision, and repeatability are more important to me. A 7/16" wrench allows me to "quickly" detach my rings AND the rings are not the weak link causing accuracy problems. I'd suggest NF Unimounts instead. </div></div>You have personally had issues with the Larue mount? Could you please go into more detail with the problems you have had?
Thanks,
-Bob </div></div>
Sure, I would not say anything unless I had personal experience. LT-104: would not hold a zero. After much troubleshooting and switching rifles and NF scopes, I was absolutely positive the mount was the problem. For example, shot a 450/600 in F-class match with this mount and then shot a 570/600 with the same rifle/scope and a NF unimount the next week. I fiddled with tightening the scope rings properly, increase the tension on the quick release lever. It did not help. I think the way the rings mount to the base is the problem: too much opportunity for things to move around. Anyway, with the NF Unimount, the AR now shoots lights out.
