Accessories 3D printed Tac Table

[Drhorsepower]

Eli, My 11 year old is now making Tac Tables on his 3d printer. They are roughly 5"x8" which is the same size as a Schmedium bag. We added 1/4 holes for mounting accessories around the edges, and two along the center plane. There are also slots so you can strap a bag using the AG gear Schmedium bra, or the Wiebad gear gray ops mini plate bag. This tac table also has a built in ARCA-SWISS adapter to mount it directly to your tripod.

I have been testing this table since February and am very pleased with it. Its a great alternative to a machined table, or a good starter one.

Here are some of the other things he is making

Reloading Equipment - Autotrickler v4 spacer mod

Hi everyone, my 10 year old son got a 3d printer recently and we have been busy learning how to make cool stuff. He has an entrepreneurial spirit and wants to offer up some of the designs we came up with. My son is printing, and shipping. All of the money goes to him, I am simply the middle man...

www.snipershide.com

Accessories - Sig Cross Magpul followers

Hi everyone, my 10 year old son got a 3d printer recently and we have been busy learning how to make cool stuff. He has an entrepreneurial spirit and wants to offer up some of the designs we came up with. My son is printing, and shipping. All of the money goes to him, I am simply the middle man...

www.snipershide.com

Reloading Equipment - V3 to V4 upgrade dust plate

Hi everyone, my 10 year old son got a 3d printer recently and we have been busy learning how to make cool stuff. He has an entrepreneurial spirit and wants to offer up some of the designs we came up with. My son is printing, and shipping. All of the money goes to him, I am simply the middle man...

www.snipershide.com

45$ shipped CONUSA and available colors as of now is Black, Orange, and Green. If you would like a specific color, just let me know!

 

[LivetohuntID]

Awesome to see your kid doing this Travis! Hope it works well for you guys!

Ken

 

[Farmerboy78]

Are the hex holes under the grip tape?

 

[springle]

I'll take a black one. Pm me where to send payment.

 

[Drhorsepower]

Are the hex holes under the grip tape?

Yes

 

[Drhorsepower]

@Farmerboy78 here is a pic of the underside. You can see the layout of the 1/4” holes as well.

 

[Stagmaster]

Which bag is that with the straps holding it to the plate?

 

[Drhorsepower]

Which bag is that with the straps holding it to the plate?

The Wiebad gear gray ops bag.

A schmedium gamechanger with the bra will also strap to it.

 

[xxerexx]

What material are you using petg, asa, pla, something else?

 

[Drhorsepower]

Pla. We tried petg but was too brittle.

 

[Drhorsepower]

bump, out of black but making more now.

 

[Drhorsepower]

Weekend bump!

 

[Drhorsepower]

Bump and Happy Thanksgiving!

 

[LeadLauncher]

I'll take one in green! I guess shoot me a PM for payment. This is awesome. I'm glad to see someone doing this, and it's even cooler that it's your kid!

 

[Drhorsepower]

TTT. Black and orange are ready to roll. Other colors 2-3 day lead time right now.

 

[LRhunter13]

Got my Tac table yesterday thanks! These are gtg.

 

[Diesel65]

Eli, My 11 year old is now making Tac Tables on his 3d printer. They are roughly 5"x8" which is the same size as a Schmedium bag. We added 1/4 holes for mounting accessories around the edges, and two along the center plane. There are also slots so you can strap a bag using the AG gear Schmedium bra, or the Wiebad gear gray ops mini plate bag. This tac table also has a built in ARCA-SWISS adapter to mount it directly to your tripod.

I have been testing this table since February and am very pleased with it. Its a great alternative to a machined table, or a good starter one.

Here are some of the other things he is making

Reloading Equipment - Autotrickler v4 spacer mod

I’ll take two sets if available. Thanks Don

www.snipershide.com

Accessories - Sig Cross Magpul followers

Hi everyone, my 10 year old son got a 3d printer recently and we have been busy learning how to make cool stuff. He has an entrepreneurial spirit and wants to offer up some of the designs we came up with. My son is printing, and shipping. All of the money goes to him, I am simply the middle man...

www.snipershide.com

Reloading Equipment - V3 to V4 upgrade dust plate

Hi everyone, my 10 year old son got a 3d printer recently and we have been busy learning how to make cool stuff. He has an entrepreneurial spirit and wants to offer up some of the designs we came up with. My son is printing, and shipping. All of the money goes to him, I am simply the middle man...

www.snipershide.com

45$ shipped CONUSA and available colors as of now is Black, Orange, and Green. If you would like a specific color, just let me know!

I’ll take one in black if y’all are still doing them. PM me for details

 

[Oldloser]

I'll take one any color. PM me for details.

 

[Diesel65]

Been using the Tac Table quite a bit. It’s good stuff. Thank you.

 

[JoeyAtch]

Messaging

 

[Chasing3]

These are pretty nice. Just got one and pretty happy with it.

 

[Drhorsepower]

Ttt

Here are some of the more popular colors.

 

[Drhorsepower]

Along with a slight design change, we are now printing Tac Tables in much stronger and more durable material. The new material is slightly different colors and here are some example pics. We also have two different colors of blue and a red that I will add pictures of by tomorrow.

 

[Drhorsepower]

Eli is taking pictures of all of the new colors today, and I will post them up.

 

[Drhorsepower]

Looks like I never posted. Here they are!

 

[firefighter1178]

I take a tac table

 

[glazed ham wallet]

Still Selling these ?

 

[Drhorsepower]

Still Selling these ?

Yes sir!

 

[Drhorsepower]

To the top...

 

[Bevo]

PM sent.

 

[JaredCO]

@5280yotes

 

[Preston399]

PM sent

 

[Vikinger]

I'll take a black. PM sent.

 

[Drhorsepower]

All pms responded to. Thanks!

 

[Gmchenry]

I’ll take a black one.

 

[Jgore]

I’ll take a red tac table.

 

[Riter67]

I’ll take an ODG one!

 

[NHPiper]

Pm incoming!

 

[NHPiper]

I received mine a couple of these after ordering. Looks amazing and works fantastically. It's very stiff. I wasn't able to create any torsion when I rotated the table with my hands. Looking forward to putting it to use in the near future.

 

[iMarvin]

Still making these?

 

[Chaka]

Also looking for one.

 

[Drhorsepower]

Also looking for one.

Yup! He’s still cranking them out. Shoot me a pm if you are interested in ordering one

 

[iMarvin]

Just got my table in to match my kestrel holder! Would highly recommend they made sure I got it in before my match this Saturday.

 

[Jakeweb09]

Just an idea, but Eli should make a larger bag rider for xlr carbon buttstocks..the xlr option is tiny and I can’t believe nobody has tried it yet