Hi All,
Recently acquired a 6.5 PRC and am looking to get set up for reloading. I know this might be a longshot but I'm looking for the below, let me know what you have!
Bullets:
- 156gr Bergers
Dies:
- Full length sizing die (no bushing)
- L.E. Wilson Micrometer Seating Die
Brass:
- New ADG, Peterson, or Lapua brass
Powder:
- N565, H1000, or RL-26 (Local in Arizona)
Primers:
- Federal 210M's (Local in Arizona)
Regarding trades, I have some 5.56, 9mm, 380 auto ammunition, 200 6.5mm 140gr ELD-M bullets, and a bunch of once fired 6.5 Creedmoor Hornady brass that I could let go.
Thanks!
Recently acquired a 6.5 PRC and am looking to get set up for reloading. I know this might be a longshot but I'm looking for the below, let me know what you have!
Bullets:
- 156gr Bergers
Dies:
- Full length sizing die (no bushing)
- L.E. Wilson Micrometer Seating Die
Brass:
- New ADG, Peterson, or Lapua brass
Powder:
- N565, H1000, or RL-26 (Local in Arizona)
Primers:
- Federal 210M's (Local in Arizona)
Regarding trades, I have some 5.56, 9mm, 380 auto ammunition, 200 6.5mm 140gr ELD-M bullets, and a bunch of once fired 6.5 Creedmoor Hornady brass that I could let go.
Thanks!
Last edited:
