• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Snipe260

Fisterateor
Full Member
Minuteman
  • Feb 11, 2017
    6,246
    9,883
    Anybody shooting this cartridge? If so i d like to hear results
     
    I am , 28” Bartlein Heavy Palma on TL3
    150s are 3050
    140s are 3140
    Extremely accurate with both
    I’m actually selling the barrel and dies
    Have about 230 rounds on it ... 175 were FF with 130s at 2800.
     
    • Like
    Reactions: Snipe260
    Basically exact same results as Seandradamus here.
    Those were the accuracy nodes for me, could go 50-60fps+ faster if I stepped on the brass. Could easily surpass 3200fps with the 140's with R26/Norma brass 28" bbl. I prefer Retumbo for the cooler powder burn.

    Last time out at 1365yds with the 150grSMK/Retumbo had me smiling for days- beautiful waterline.
     
    So it's not true where he says 130 eldm's at 2900 fps get accuracy in the .1's?

    What kind of bullets and how's the accuracy?
     
    Huh? Not sure how you got there. What I was saying is that I don't think you're likely to get 2500rds at peak accuracy unless you're running 6.5 Creedmoor speeds.

    I'm shooting 147's at 3000 - 3050. Shooting sub 1" groups at 300yds most of the time.

    I misunderstood your post, sorry about that.

    How well does it feed through magazines, and which action are you using?
     
    Just did some load development today was able to get up to 3012 with the 140 Berger elite hunter. This was very surprising for. 20” barrel found a good node at 2936 which is a good bit below where I found pressure. It produced a 3/8” group at 100