6 br go / no go gauges

[bgavin]

Anybody know where any are in stock?

Got 6 br barrel incoming with nut system I need to head space. I ordered a set of gauges from PT&G a couple weeks ago. I called today to check on them and they are saying another month before they ship. Barrel will probably be here in a couple weeks and would like to be able to get it on the action.

Thanks

 

[Supersubes]

6mm BR Go Gauge

Getting down to the last thousandths of an inch when chambering has never been easier using these Go, No Go gauges. Made by Pacific Tool and Gauge from premium steel and hardened to last, they'll give you years of accurate, reliable service. <p><b>Note:</b> Cannot be shipped outside of the...

www.grizzly.com

 

[bgavin]

6mm BR Go Gauge

Getting down to the last thousandths of an inch when chambering has never been easier using these Go, No Go gauges. Made by Pacific Tool and Gauge from premium steel and hardened to last, they'll give you years of accurate, reliable service. <p><b>Note:</b> Cannot be shipped outside of the...

www.grizzly.com

 

[Clark]

Anything that involves my younger brother's lathe, I buy the go gauge.

But 6mmBR I have a lifetime supply of RP and Lapua brass that is new. Because my brother is not a 6mmBR person, I just use the new brass as the go gauge for my lathe and my reloading exclusively.

Also anything I do not have a lifetime supply of the same batch of brass, I but the go gauge and use it, as I a getting to the age of making as many mistakes as my brother.