• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

SOLD 6BR complete package

bross412

Private
Minuteman
Aug 25, 2020
67
23
6BR complete package minus optic $3,800. 350 rounds down the barrel. Basically a safe queen.

-Impact 737r 308 bf
-Area 419 break
-Barrel from straight jacket armory (I rattle canned it)
-----Barrel Contour: Heavy Palma
-----CAL/Twist options: 6mm 7 twist
-----Finished Barrel Length: 24
-----Chamber: 6 BR .112 FREEBORE
-----Muzzle Options: 5/8X24TPI
-trigger tech special
-mcs TCS gap camo
- 2 mdt 6br mags
This rifle is a lights out shooter. Selling because I barely use it. I'm using the funds for a high end 6.5 cm gas gun.

If you buy the rifle I'll give you a great deal on the reloading components :)
 

Attachments

  • PXL_20231116_012820549.jpg
    PXL_20231116_012820549.jpg
    992.4 KB · Views: 187
  • 17001412090057384803270707710700.jpg
    17001412090057384803270707710700.jpg
    330.3 KB · Views: 178
  • 17001412189001528117865600089321.jpg
    17001412189001528117865600089321.jpg
    601.1 KB · Views: 148
  • 17001412302491475005770270311715.jpg
    17001412302491475005770270311715.jpg
    407.6 KB · Views: 173
Last edited:
Would trade for seekins sp10 in 6.5 plus a little bit of cash.
The Seekins SP-10 upper & lower is what GA uses to make the GAP-10. I just had one converted. I was going to do it as soon as I bought the SP-10, but it was a true 1/2 moa ar-10. So I put some rounds through it for a few years 1st.
Now my pencil thin barrel has been replaced with a Bartlein cut rifled & some other critical components……shoots better than most would believe now. Attached are some pics of GAP & Lawson Tactical working together
 

Attachments

  • IMG_3733.jpeg
    IMG_3733.jpeg
    481.6 KB · Views: 15
  • IMG_3732.jpeg
    IMG_3732.jpeg
    411.1 KB · Views: 15
  • IMG_3731.jpeg
    IMG_3731.jpeg
    368.6 KB · Views: 13
  • IMG_3730.jpeg
    IMG_3730.jpeg
    631.9 KB · Views: 14
The Seekins SP-10 upper & lower is what GA uses to make the GAP-10. I just had one converted. I was going to do it as soon as I bought the SP-10, but it was a true 1/2 moa ar-10. So I put some rounds through it for a few years 1st.
Now my pencil thin barrel has been replaced with a Bartlein cut rifled & some other critical components……shoots better than most would believe now. Attached are some pics of GAP & Lawson Tactical working together
I'm glad your happy with yours. I am also very happy with mine. I still need to build up a load for it. Right now just shooting AAC "match" ammo. It's about 1.2 moa but at $1 per round I can't complain at all.
 

Attachments

  • PXL_20240315_131718798.jpg
    PXL_20240315_131718798.jpg
    862.6 KB · Views: 8