Hey all. For sale is a used Proof Research carbon fiber barrel for Accuracy International M30 rifles (AXMC/AXSR/PSR/ASR)
Has 518 verified rounds down the pipe:
498 x my hand load. The That load is Berger 105, 40 grains of RL16 and Lapua brass.
20 rounds of FGMM Berger 105 factory ammo.
The hand loads run right at 3050fps at 2500 ft above sea level. The FGMM with the same bullet was faster than my hand load. Those ran at 3125 or so. I only chrono’d 5 of them but was surprised they were faster than my hand loads because I considered my hand loads to be mild.
$500 shipped conus for the barrel.
Zelle, PP F&F or Venmo F&F for payment.
Also available to the buyer but likely going to be listed separately:
195 pieces Lapua SRP brass 2x fired unprocessed
74 pieces Lapua SRP brass 1 x fired, FL sized, trimmed and primed with FGMM 205 primers
74 pieces Lapua SRP brass new, neck sized for tension with Whidden bushing due, primed with FGMM 205
72 pieces Lapua SRP brass new unprimed, untouched
Whidden click adjustment seater and sizing die set.
415 pieces of Lapua brass and 6CM Whidden dies for $550 shipped.
$1000 shipped for both!
Possible trades:
SR25 parts
KAC anything
Noveske parts
6.5CM ammo, brass or bullets
Badger C1 FDE 1.70 34mm
TBAC SR brakes
TBAC bipod
Peq15
Has 518 verified rounds down the pipe:
498 x my hand load. The That load is Berger 105, 40 grains of RL16 and Lapua brass.
20 rounds of FGMM Berger 105 factory ammo.
The hand loads run right at 3050fps at 2500 ft above sea level. The FGMM with the same bullet was faster than my hand load. Those ran at 3125 or so. I only chrono’d 5 of them but was surprised they were faster than my hand loads because I considered my hand loads to be mild.
$500 shipped conus for the barrel.
Zelle, PP F&F or Venmo F&F for payment.
Also available to the buyer but likely going to be listed separately:
195 pieces Lapua SRP brass 2x fired unprocessed
74 pieces Lapua SRP brass 1 x fired, FL sized, trimmed and primed with FGMM 205 primers
74 pieces Lapua SRP brass new, neck sized for tension with Whidden bushing due, primed with FGMM 205
72 pieces Lapua SRP brass new unprimed, untouched
Whidden click adjustment seater and sizing die set.
415 pieces of Lapua brass and 6CM Whidden dies for $550 shipped.
$1000 shipped for both!
Possible trades:
SR25 parts
KAC anything
Noveske parts
6.5CM ammo, brass or bullets
Badger C1 FDE 1.70 34mm
TBAC SR brakes
TBAC bipod
Peq15
Last edited:
