Suppressors 9mm through YHM 7.62QD

[Ishallbie O'Cullkillin]

It has the potential to be a monumentally stupid question, but I noticed that my YHM 7.62SD has a .40" bore and would allow a .355 bullet to pass through it with .0225 clearance on all sides under ideal conditions. Has anyone tried this?
Seems like the length of this suppressor would contribute to the increased likelihood of a baffle strike. My first instinct is that it might work , but is a bad idea.

 

[NRF]

Re: 9mm through YHM 7.62QD

[email protected]

EMAIL YHM at that address and ask them, or try it yourself and let me know how it worked If I hear nothing back I would say it didn't work well

 

[bladesmith2]

Re: 9mm through YHM 7.62QD

It most likely will not work. I would try it.

 

[HOOFER]

Re: 9mm through YHM 7.62QD

i would guess that the excess clearance is just to give more leway from baffle strikes. adding a bigger projectile just increases the chances of baffle strikes. along with the long length and weight vs a 9mm can. i would use caution. and when you do get a baffle strike will they warranty it shooting 9mm through it. i would call them and ask, and if it would be covered. let it rip.

 

[BOLTRIPPER]

Re: 9mm through YHM 7.62QD

if you ever have had a baffle stike..........you would know not to tempt fate......

 

[slimguns]

Re: 9mm through YHM 7.62QD

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BOLTRIPPER</div><div class="ubbcode-body">if you ever have had a baffle stike..........you would know not to tempt fate......</div></div>

Agree!! I was sad, mad, a bit shocked, and stunned when I saw my old .308 can traveling down range. That was even before the Gemtax kicked in, if it happened now I think I'd cry.

 

[Ishallbie O'Cullkillin]

Re: 9mm through YHM 7.62QD

Thanks guys. I think I will pass on this one. Every day life is dangerous enough.

 

[300WSM]

Re: 9mm through YHM 7.62QD

how in the heck would you mount it anyway? lol

 

[Ishallbie O'Cullkillin]

Re: 9mm through YHM 7.62QD

The YHM AR15 QD flash hider bored out to .40, muzzle thread pitch is 1/2x28.