Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Looks good, I have a SOCOMII and was wondering what I would have to do to put my Thunderbeast on it... just waiting on the paper work to get back. Did you have to get an extended QD flash suppressor made or is that the factory stock AAC flash suppressor?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ammotragus</div><div class="ubbcode-body">Looks good, I have a SOCOMII and was wondering what I would have to do to put my Thunderbeast on it... just waiting on the paper work to get back. Did you have to get an extended QD flash suppressor made or is that the factory stock AAC flash suppressor?</div></div> IT was the new breakout from AAC keep in mind had to use shims it has a stepped counter bore (.080 deep and a I.D. of .815) I used the .030,.020 and .015 and with all the corner breaks it worked perfect
as a side note ran to the range and put 30rds through it with no problems
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ammotragus</div><div class="ubbcode-body">Looks good, I have a SOCOMII and was wondering what I would have to do to put my Thunderbeast on it... just waiting on the paper work to get back. Did you have to get an extended QD flash suppressor made or is that the factory stock AAC flash suppressor? </div></div>
Ok guys I'm a HONEYWELL machinst. This setup from Deltapdesign is the way to go. You install the part against the barrel first. Then you install the sight. The problem with Smith enterprise is it does not tighten against the barrel. It tightens against the gas system. Fischer fixed the problem. With a larger bore so you wont strike the supresser.