Accuracy of Pull Down Brass

[dleeds]

So I have a whole lot of pull down, primed Federal brass from American Reloading. I was wondering if anyone has experience with it, and what their thoughts were.

 

[GIXXER2000]

I have used pulled down brass in the past with good results. Since it's pulled down you will need to resize the brass, if you have a neck only bushing die that will work. Just keep in mind that anything you do to prep the brass it already primed. After its been fired once I would also remove the burr around the flash hole. Just about all Fed brass seems to have crap left around the flash hole that needs to be removed