Accurate Ordnance built .223AI trainer (edited)

Status
Not open for further replies.

pinkhair

Sergeant
Supporter
Full Member
Minuteman
Aug 26, 2008
816
180
40
Savannah, ga
This rifle shoots great, I've had it for a couple years and it's seen around 1500 rounds so the barrel still has plenty of life.
The specs are as follows:
Accurate Ordnance Branded Stiller Action
Barrel is 18" in the Accurate Ordnance Varmint/Sendero contour with a Griffin Armament SPR brake (I have a spr can which I ran on this rifle)
Timney trigger set at 2 pounds
Stock is a Manners TA elite tactical GAP with mini chassis
Comes with 2 10-rd magazines, one AI and one MDT

It likes 25.3 grains of varget with either a 75 or 80gr ELD. with 75gr ELD velocity is around 2900 FPS.

Asking $2800 shipped. It currently wears a Leupold Mk5 HD 5-25 with the TMR reticle which can go with the rifle for an additional $1650, vortex rings included.

I also have a redding competition seating die and neck sizing die, as well as a few hundred rounds of formed lapua brass that can go with the rifle (or barreled action) for an additional $150
The barreled action alone is $1650 shipped
 

Attachments

  • IMG_1220.jpg
    IMG_1220.jpg
    822.6 KB · Views: 113
  • IMG_1221.jpg
    IMG_1221.jpg
    864.8 KB · Views: 115
  • IMG_1222.jpg
    IMG_1222.jpg
    820.3 KB · Views: 104
  • IMG_1223.jpg
    IMG_1223.jpg
    639.1 KB · Views: 89
  • IMG_1224.jpg
    IMG_1224.jpg
    1.1 MB · Views: 99
  • IMG_1130.jpg
    IMG_1130.jpg
    58.9 KB · Views: 107
Last edited:
Status
Not open for further replies.