Im new to the suppressor world and need some advice. I have a hybrid 46 on the way which I plan to run on several rifles. It comes with the direct thread 5/8-24 mount. I was looking to purchase a thread adapter for my 450 bushmaster from 5/8-34 to 5/8-24 since sc doesn't sell that direct thread mount. Is this a safe considering there’s not much room for error with the 450 on the 46 or should I suck it up and buy the muzzle device and asr mount from sc? I also thinking about using the adapters on my 556 guns so I could direct thread mount everything on the 5/5-24. Thoughts? Thanks
Suppressors Adapters for hybrid 46
- Thread starter Ryan abernathy
- Start date
- Tags
- hybrid silencerco
Hellfire Suppressor Mounts
Our mount allows you to use your SilencerCo Omega or other compatible suppressor with the Hellfire system. Go from brake to suppressor, no tools required!
www.area419.com 
I don’t know of them, so use at your own risk.
I have used the Area419 system on multiple suppressors across multiple firearms without issue.
I have used the Area419 system on multiple suppressors across multiple firearms without issue.
I have Hybrid I use on a 458 SOCOM and like it. I went with the ASR and muzzle break. I'm not a fan of direct thread adapters or direct thread in general, damage your threads or have the suppressor walk off can lead to bad days.
A muzzle break makes for a nice sacrificial surface that protects your blast baffle as well.
Hellfire aren't going to work with a 450bushmaster.Hellfire Suppressor Mounts
Our mount allows you to use your SilencerCo Omega or other compatible suppressor with the Hellfire system. Go from brake to suppressor, no tools required!
I have used the Hughes precision adapters a number of times with no issues, though never with anything so close in tolerance as a 450BM/Hybrid. They have been well made in my experience, but I would definitely recommend checking alignment with a range rod before shooting.
Thanks that’s what I wanted to hear.
How ya figure?
Does Area419 make a brake in .45 bore? I've never looked
Not a brake if you look at the links I posted. A suppressor adapter and thread adapter.
Well on a rifle it didn't look like the bore was large enough but pulled a new one off the shelf and looked at my Hybrid adapter and looks like it might work. It's close enough you might check with Area419 but maybe yeah.
Similar threads
Suppressors SilencerCo Omega 300 "Base"
Suppressors ECCO Machine and AAC 762SD