For NRL22, I have a Brownells/Kidd 10/22 with a 0 moa picatinny integral rail on the reciever. Between dialing and holding, I'm about maxed out at 300 yards with my Athlon Ares BTR.
I'm currently using seekins rings, is there an easy way to add a 30-40 moa cant to the setup with out having change to a expensive mount? (sub $200) From what I've found there are not many options if you have a 0 moa integral picatinny rail, especially if scope height is taken into consideration. I tried a cheap UTG 20 moa picatinny/picatinny rail but it added too much scope height, not to mention being cheap and unreliable, and only 20 moa.
Aside from anything fancy & expensive (I've been considering changing out the receiver) what is the easiest way to get more cant for long range? As of now its looking like the Burris XTR rings with the inserts may be the easiest option. Thanks!!
I'm currently using seekins rings, is there an easy way to add a 30-40 moa cant to the setup with out having change to a expensive mount? (sub $200) From what I've found there are not many options if you have a 0 moa integral picatinny rail, especially if scope height is taken into consideration. I tried a cheap UTG 20 moa picatinny/picatinny rail but it added too much scope height, not to mention being cheap and unreliable, and only 20 moa.
Aside from anything fancy & expensive (I've been considering changing out the receiver) what is the easiest way to get more cant for long range? As of now its looking like the Burris XTR rings with the inserts may be the easiest option. Thanks!!
